Sirius sv3tk1 satellite radeo receiver circitbord schematics ,it dosn't work

Most GM radios are coded to only work in the car with a matching VIN number, so most of the time you cannot do it, sorry to say. Actually, the new ONYX PLUS radio has many more features than the Caddy XM, like remembering the last 30 minutes you've listened to and the ability to pause at a drive-thru, etc. Schematics are next to impossible - back in the 80's Delco would share, but not since.

Thank you 20 minutes in the freezer works. Amazing

u have to relocate the antenna for the sat radio

where is the antenna located make sure it is not covered by anything. Also make sure there are no kinks or breaks in the antenna wire

I have the exact same issue. I have swapped with two identical MR17.2 radios and swapped out the sirius receiver. No change. I even bought a remote thinking I had to have a remote installed to get it to work...still no diff. Have you ever found a solution?

What you'll actually need in order to get Sirius is a satellite specific receiver (the JBL SIR 2.5 Satellite Receiver). That should come with the antenna you need.

Got to here for direct DL: http://www.xacttechnology.com/getdoc.php?id=37 -or- Here and click on the Documents: XTR1 Manual link: http://www.xacttechnology.com/Sirius-Satellite-Radios-7/XTR1-Sirius-Satellite-Plug-and-Play-Receiver-12.html

my sirius stiletto 100 power on/lock switch slides up and down freely. feels like something came apart inside the device. any solutions?

Cliff, If you mean a schematic then u are going to have a tough time finding that. It is manufactured by Directed Electronics, so you might try to contact them, but they might not be willing to divulge that info.

Good luck!

Go into the menu and reset to factory default