Print spool issue

To Download:

1 Go to hp.com 2 Click on Support and Drivers 3 Enter your product name or number, in this case just type in HP Officejet Pro L7780 4 Hit go 5 Choose your operating system 6 Hit Next 7 Click on the link that says Driver - Product Installation Software 8 Save it to your desktop
You can also download the CD from the website. Same page.

Please check the Page selecton
check the page setup click on file -click on pagesetup
Press Ctrl+P
Check the layout settings
Check print priver if print privew is ok then its software issue
Check the printer drivers

DRIVERS HP Officejet 6310 All-in-One Printer

If you do not have the disk you can use the links below to download the driver (copy and paste): Setup and install HP Officejet 6310 All-in-One Printer: http://www.google.com/url?sa=t&source=web&ct=res&cd=1&url=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2FsetupCategory%3Flc%3Den%26cc%3Dus%26product%3D1119598%26dlc%3Den&ei=g7UwSqeOBYalsAbMmuHiBA&rct=j&q=HP+Officejet+6310+download+drr&usg=AFQjCNH2VkIqJB5qSW9stPAp_2jxjbzIMQ Select your operating system HP Officejet 6310 All-in-One Printer: http://www.google.com/url?sa=t&source=web&ct=res&cd=2&url=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2FsoftwareCategory%3Fproduct%3D1119598%26lc%3Den%26cc%3Dus%26dlc%3Den&ei=g7UwSqeOBYalsAbMmuHiBA&rct=j&q=HP+Officejet+6310+download+drr&usg=AFQjCNFZYok6QLKOBao-JeCxcfscUuxklg Or try: http://www.google.com/webhp#hl=en&q=HP+Officejet+6310+download+drr&aq=f&oq=&aqi=&fp=9ZixuGkm6ts

slowly off and on the printer for five times without cartridge, printer saves data of cart of last 5 only so next time it reads full ink..

Hello sir,

you go on HP Officejet 6310 All-in-One printer, double click on it, a small window will appear, delete all recent commands
if problem not solve then turn off your pc and printer both and unplug the U.S.B cable, now turn on the pc and delete HP Officejet 6310 All-in-One driver and restart pc then install the driver manually again and print your documents again.

thanks

Hi for solution do this
First put out of the printer the Ink Cartriges then
press 4 + # + OK this send you a info menu
with the nav. Keys go to CHECKSUM FOR RELOCK DATA IMPUT press Ok 5 times . Then Go out there by pressing Cancell Button ant there you go if this dosnt work at the 1rs time you need 2 o 3 times more to ensure relock data ok
bye :)

Check the way your print Jobs Spool up in your PC. you may have a totally different set up for printing in your new computer that takes two or three extra steps(such as spooling the print job) prior to actually sending it to the printer to be printed. If you have a user manual for your new computer, check the printer set up and see if it is set up to print directly to printer or print to spooling folder then to printer. Also try a different driver if you wish, I know the 2430 can use either PCL5 or PCL6 drivers... I'd start there and see if there is a difference.... the problem isn't your printer obviously its the way your computer is communicating to it. Best of luck to you.
Faxgenius.

There are no drivers for fixya but I have found a workaround by some anonymous poster


Xp software&drivers will work in Vista after a little tweaking in printer properties.


1)Install the CD-Rom HP Software/Drivers that came with your Printer at the time you purchased it. These Xp software&drivers are Vista Compatible after tweaking the Printer Properties. Reboot after installing.


2)Goto Start/Printers. Right click HPLaserJet1020 then Left click Properties. An HPLaserJet Properties window should have popped up.


3)Click the Advanced Tab. Click the Print Processor button located at bottom of window.


4)Select print processor as>>>IMFPrint. Then Select Default Data Type as>>>RAW. Click OK.


5)Now return to the Main HPLaserJet Properties window and click the General Tab. On the Bottom of that window; Click the Print Test Page Button. Finished! A test page should be printing out if you adjusted the printer properties correctly. Enjoy!


optionally you may have to disable print spooling

Quote "This did not work for me until I changed the option in that same window (advanced settings) to "print directly to the printer". Spooling does not work. "

you can contact HP chat or email support

In this case you can bypass the spooler by the following steps:

1. Right click the printer icon & left click the printer properties

2. Click the Advenced tab in the printer properties.

3. Select the option PRINT DIRECTLY TO THE PRINTER & UNCHECK THE OPTION SPOOL THE DOCUMENT.

4. Click apply and ok.

5. Try printing.