Question about KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

2 Answers

KItchen Aid Dishwasher KUDI01FL Stopped Running and Will not Start

KUDI01FL stopped running and will not start. The Clean LED light blinks 7 times, pauses, then blinks 7 times again. I want to reset the system to clear the error, and try running it again. I tried turning off/on the power to the dishwasher, but that did not reset the system. I had a problem last year and had a tech visit who entered a key sequence to reset the system. Does anyone know they key sequence to reset this model? Thanks.

Posted by on

  • Anonymous Nov 16, 2008

    Clean led keeps blinking. How do I reset it. Whats the sequence

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Try the reset button sequence i posted in the other question..

Posted on Jan 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Can someone tell me the sequence code for my kitchen aid dishwasher

Posted on Jan 31, 2009

  • dmlr2 Jan 31, 2009

    what other question send it to me

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: what is the reset sequence

Kitchen Aid - KUD102FRBL1 - Black dishwasher with buttons on the top of the door...

Problem
Cancel light is on, blue power light is flashing 7 times then a pause.
Solution
Normal > HeatDry > Normal > HeatDry (all lights light up)
Close door. Slide an implement into the gap at the top and press the Cancel button twice.

Bingo!

Posted on Mar 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn on my tv it tries to boot, blue mitsubishi home screen come up, i hear fan then it all shuts off while green light blinks.


Try a reset. Start by unplugging for 1 minute, then plug back in & if still won't restart try the following. If none of the following work, you will need a technician.

Initializing the TV in many cases can remedy a problem.
In the 2006 product line Initialization is now a user function.
Pressing the front panel "INPUT' and "FORMAT"
buttons at the same time activates Initialization. When
complete all user settings will have to be set again. The
table in Figure 4-3 list the User Initialization procedures.
Note: Pressing INPUT and FORMAT is the same as
the Initialization in the Option Menu (MENU-2-4-7-0)
Order Name Procedure Results Notes
1 System Reset Press <System Reset>
on Front Panel
Hardware & TV operating
software reset.
POWER/Timer LED flashes for 60
seconds. No customer settings
are changed.
2 User Initialization
Press <INPUT> &
<FORMAT> on Front
Panel at the same time.
All customer Audio &
Video settings are reset to
factory default.
All customer settings will need to
re-configured.
3 Reset System
Defaults
From the remote, press
<MENU> <1-2-3>
<ENTER>
All customer settings
except V-Chip are reset to
factory default.
Netcommand, Channel Memory,
etc., will need to be re-configured.
SERVICER
PROCEDURE 4 Initialization
From the remote, press
<MENU> <2-4-7-0>*
select "INITIAL" press
<ENTER>
All customer settings are
reset to factory default.
All customer settings will need to
re-configured.
MITSUBISHI RESET / INITIALIZATION CHART
CUSTOMER
PROCEDURES
Figure 4-3
Figure 4-4
LED Indications
The front panel LEDs, refer to Figure 4-4, also assist in
determining the cause of a symptom. Figure 4-5 illustrates
normal LED operation. Figure 4-6 shows the
LEDs response when a problem is detected and indicates
the possible cause.
Power/Timer
Indicator
Status
Indicator
Lamp
Indicator Condition
Off Off Off Off (standby)
Blinking green
fast Off Off Initialization (10 - 65 seconds)
Off Off Blinking
green fast Lamp runs for 1 min after PTV off
Green Off Off Power On
Blinking green Off Off Power On Timer is set
NORMAL LED INDICATIONS
Power LED Status LED Lamp LED Condition
High Temperature - check ventilation air flow.
(Temperature sensor is disconnected.)
Off Off Blinking yellow Lamp cover is open.
Lamp failure (Lamp fails to turn on)
Off Off Red (Lamp turns off after lighting)
Lamp is broken
Off Blinking Red Off Fan Stop
Off Red. Off Circuit failure. (Run Error Code Check)

Apr 08, 2015 | Mitsubishi WD-65731 65-Inch 1080p DLP HDTV

2 Answers

Clean light blinking


If the clean light blinks four times and then pauses and then blinks four times again and repeats, the problem is your pump motor. If there is water under the DW the pump clamp has probably failed and sprayed water onto and inside the motor. Call a certified Kitchen Aid repair service.

Aug 13, 2014 | KitchenAid Dishwashers

1 Answer

My Whirlpool GU2400XTP83 stopped during the wash cycle and there is a blinking light above the "light" cycle button. I can not reset the dishwasher, stop or start it.


Hello,

To reset the dishwasher push in this order the,

HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF

the control will be reset...but more importantly how many times ina row does the light flash..it will indicate what error code its displaying??

example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4
7 flashes then pause then 7 flashes its displaying the error code#7 ect ect



GENE

Sep 05, 2011 | Whirlpool 24 in. GU3200XTP Built-in...

2 Answers

What is the reset sequence of a kitchen aid kudi01fl my dishwasher wont start the control lock button is on


Press and hold the heated dry button for 5 seconds to unlock the controls. If that doesn't work go to the link below and it will tell you how to reset the control board.

http://www.appliancerepairlesson.com/dishwasher-2/dishwasher-clean-light-blinking-7-times/

Good luck

Mar 01, 2011 | Dishwashers

1 Answer

My kenmore dw just stopped running thru cycles except drain


Hello, With the information you supplied I'm going to assume the light is blinking 7 times and pausing then blinking 7 times and so on. With the door cracked open hit the following button combination: -high temp wash
-heated dry
-high temp wash
-heated dry Then close the door and hit cancel. The pump will run for a few moments and then you should be all set. Hope this helps Mike

Nov 19, 2009 | Refrigerators

2 Answers

''Clean'' light is blinking, ''Cancel'' does not reset the cycle.


If the clean light flashes 7 times, pauses, then repeats...

When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

If the issue returns, you could have a problem with the heating circuit (ie. element, thermostat or wiring).
It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it).

Good luck!

Apr 01, 2009 | Whirlpool 24 in. DU1055XTP Built-in...

1 Answer

Led has been blinking for two hours .


is it blinking constantly > or is it a number of blinks then a pause...count the blinks before the pause ..this is a repair code for your tv

Dec 09, 2008 | Mitsubishi WS-65313 65" Rear Projection...

1 Answer

Blinking Clean Light


  • Close dishwasher door
  • press "Hi-Temp Wash"
  • press "Energy Saver Dry"
  • press "Hi-Temp Wash"
  • press "Energy Saver Dry"
run the 'normal' cycle without the hi temp feature

Nov 16, 2008 | KitchenAid 24 in. KUDI01FL - Multiple...

Not finding what you are looking for?
KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher Logo

4,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Mike

Level 3 Expert

4357 Answers

Smitty

Level 1 Expert

240 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...