Equity Time USA Sky Scan 44100 Clock Radio Logo
Anonymous Posted on Dec 06, 2010

Model 31981B Replaced AAA battery's and now it is 3 hours behind

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Dec 06, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 06, 2010
Answers
1
Questions
0
Helped
627
Points
8

PROGRAM MENU: b> TIME ZONE: Use a pencil or paperclip togently press and release the TIME ZONE button one time. Press and release the PLUS button to choosefrom: PST= Pacific Time MST= Mountain Time CST= Central Time EST= Eastern Time Press and release the SET button to return to a normaldisplay. DAYLIGHT SAVING INDICATOR: The DST indicator isdefaulted to the ON position. If your area does not observe DST please removethe battery cover on the back of the station and move the DST switch to the OFFposition. SET CALENDAR, TIME, 12/24HR & F/C: Press and release the SET button once toenter the program menu. NOTE:Holding a button will move the digits faster. YEAR: The Year will be flashing. Use the PLUS or MINUSbutton to set the Year. Press and release the SET button one time. MONTH/DATE: The Month and Date will beflashing. Use the PLUS or MINUS button to set the Month and Date. Press andrelease the SET button one time. HOUR/MINUTES: The Hour and Minutes will beflashing. Use the PLUS or MINUS button to set the Hour and Minutes. Press andrelease the SET button one time. 12/24-HOUR TIME: 12Hr will be flashing. Use thePLUS or MINUS button to switch to 24-Hour time. Press and release the SETbutton one time. FAHRENHEIT/CELSIUS: The Temperature will beflashing. Use the PLUS or MINUS button to switch from F to C.

Testimonial: "Response was quick very easy to understand the instructions and follow. THANK YOU"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I change the time zone for model 31981B?

How To Set Your Time Zone
Time Zones around the world are identified by how many hours they are off-set from Greenwich Mean Time. US time zones are 5 to 9 hours behind Greenwich Mean Time and are identified as:
Eastern -5 Central -6 Mountain -7 Pacific -8 Alaska -9
Your SkyScan model 31981 is pre-set to Pacific Time. To set your clock to your time press and hold the mode button for 2 seconds. The off-set hours will appear and blink in the clock window. Press the up or down button to designate your time zone. Press the alarm button to exit time zone setting mode.
http://skyscanatomicclocks.com/manuals/31981.pdf
0helpful
1answer

Replaced the 4 AAA batteries still does not work

There may be a button battery on the bottom side of the camera. Look for a circle about 3/4 of an inch in diameter with a screwslot in the middle. This battery number is "usually" CR2032.
0helpful
1answer

Myti-84 plus silver won't stay on. I just replaced the batteries, but when I hit the ON button it only stays on for a few seconds then turns itself off.

You might try taking out the backup battery. It is located above the AAA behind a little door with a screw. Leave all batteries out for a few hours. Reassemble. This might work. If not, you may also try getting a new backup battery if you haven't already. Hope this helps.
1helpful
1answer

I do not see anything on the screen. I replaced

First try turning the calculator on and then pressing the 2nd key. Hold down the "up arrow". If the contrast has been turned down, this should turn it up.

If that doesn't work, could be that your calculator needs to be reset. Take out the internal battery located right above the 4 AAA batteries behind a small door with a screw. Leave all batteries out for about 8 hours. Reassemble and hopefully you can turn it on. If this doesn't work, you might replacing the internal battery. Hopefully one of these solutions will work.
0helpful
1answer

I have several calculators that won't work from just not turning on to one of the buttons is broken, where can i send them to be fixed?

For the ones that won't turn on, it may be that your backup battery needs to be replaced. The backup battery is above the 4AAA batteries behind a little door with a screw. Before you go buy a new backup battery, try leaving the backup battery and the AAA batteries for about i hours and then put them back in. It could be that the calculator just needs to be reset. Good luck.
1helpful
1answer

How can I revive my TI89 after two years of not using it?

It could be that you need to replace the backup battery located behind a little door with a screw in the battery compartment. If this doesn't work, try resetting your calculator by leaving backup and AAA batteries out for about 8 hours and reassembling it. Hopefulyy this will work. Good luck
0helpful
1answer

I turn on the calculator and it comes up with the little black thing in the left hand corner. Then it turns off. It doesn't allow you to do anything, it just shuts off. At first I thought there was a...

Your calculator may need to be reset. Open the battery door. There's an internal battery behind a little door with a screw right above the 4 AAA batteries. Take this battery out. Leave it out for about 8 hours then put it and the AAA batteries back in. Hopefully this will solve your problem.
10helpful
3answers

My TI-84 Plus Silver Edition is completely frozen up.

A possible solution is to reset the calculator. It's worth a try.

Take out the backup battery above the regular batteries behind a little door with a screw. Leave it out for about 8 hours along with the 4 AAA batteries. Put it all back together and see if this works. Not sure but it is worth a try.
4helpful
1answer

Calculator will not turn on

Try the following

1) Remove one of the AAA batteries, hold down on the DEL key while reinserting the AAA battery. The handheld might display Waiting…Please install calculator software now. Ignore this message. Remove and reinstall one of the AAA batteries again This time, do not hold down the DEL key.
2) Remove one of the AAA batteries, press and hold the [on] key for 10 seconds, release, replace the battery, then turn the unit on. Adjust the contrast.
3) Remove the AAA batteries for three hours. After the three-hour period, reinsert the batteries and turn the handheld on. Adjust the contrast if necessary.

If needed, reinstall OS by downloading the OS from the TI site and ....
On your computer, choose Start, Programs, TI Tools, TI Connect, TI OS Downloader.

(I am not the one who came up with this answer, but found it on an other site. If this doesn't work, please let me know)

Gr Marijn
Not finding what you are looking for?

637 views

Ask a Question

Usually answered in minutes!

Top Equity Time USA Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Equity Time USA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...