I can't detect my cp on computer - Sony Ericsson W910i Cellular Phone

Dell :Fn + F8

Have a good day!
We supply original projector parts: lamp, bulb, Lcd, Lens, DMD,
motherboard, powersupply ... with high quality and competitive price.
Jerry China
Tel: +86 131788 67858
E-mail: [email protected]
Skype: lampdeng.com
YM: [email protected]
http://facebook.com/lampdeng
http://www.lampdeng.com

If both of the hard drives are on the same data cable/disk drive controller it is unlikely that both the have failed. Reseat the data cable connectors on the hard drives and at the motherboard.
Reboot you computer and hopefully it will boot up.
Check the BIOS configuration to see if the BIOS detects the hard drives.
If not the disk drive controller on the motherboard may be faulty.

Sounds like the the monitor detect line is causing your issue. The Hitachi CP-X250 has VGA in & out. Hook the Dell to the VGA out port of the projector.

You plug it in the USB, wait for it to be detected and to appear in My Computer then you just manually copy all your personal files to it.

if your machine does not detect the ink, clean the drum in hole.

Try connecting the device on a different port and check if it will be detected if still not power off the device for 30 seconds and if still not detected you can use a different data cable for this unit so we can check if the cable is working fine........

contact hitachi and get a replacement cd. tell them it was damaged in shipping. it would cost less to send you a new cd than it would be to have the shipping company come down, fill out a report, etc.

Hi, just pull the printer cable from the pc for now and try updating your printer drivers:
Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous

Hi i have a motorola v3i cellphone, but i cannot link from pc to cell. It detects the cable, but no link.

Please help!

I have the same problem with a Hitachi CP-X345 Multimedia Projector. My Acer Aspire 3630 Laptop cannot be detected but it works without incident with a Dell Vostro 1500; just plug and play. Desktop settings to second screen doesn’t seem to help.