Washing machine is not spinnig out the water

check under agitator for broken splines or cogs to tub

Check the door lock. It is probably faulty.

your diverter valve is stuck in recirculate mode.
There maybe lint jammed in the diverter valve.

What is the model number of the unit?

The timer swicth needs to be replaced. Part of the time swicth that controls the spinnig is bad.replace timer swicth and that will fix your problem

NOT SPINNIG CAN BE:BAD DRIVE BELT,FAULTY MODULE OR ENGINE.

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

the main bearings have worn out and should be replaced soon as possible if left the drum will colapse as the bearing shatters could cause other damage to machine parts it will normally fail when the machine is under most load whilst high speed spinnig

This is joyce
sounds like the belt needs to be tighter. sounds like its slipping on pully. that may be why its not spinning correctly.
thanks
joyce

Having the same problem. Any ideas at all? It's really frustrating.

nwesthamz
Rank: Apprentice
Rating: 75%, 1 votes
mw511 fills with water but cylinder isnt spinnig and when it stops filling nothing happens. However sometimes it will go complete cycle ans a noise can be heard on spin cycle even though it is not spinning. As thoiugh the motor is not engaging with the cylinder
Was this helpful? Yes No