At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is no reference to your problem in the C5100 Service manual. I have 17 years experience on OKI printers and never heard of this error. it must be specific to a program you are using. try printing the windows test page and if that is ok consult the people who made the program as that's where the trouble must lay.
Go here and choose your OS then download and install the drivers.
http://my.okidata.com/pp-C5100n.nsf/openingdrivermenu?OpenFrameSet
After that you should be good to go.
If this was a help please give me 4 thumbs up as I am trying to build up my rep on this site!
You have to determine if the drum cartridge or the fuser is the problem. Do a panic stop before the paper hits the fuser and see if it has the residual image. If it is clean then the fuser is the problem.
you have to open the cover and look at the 4 black strpies on the cover.on the right there is a grey flat cable and you have to press is firmly back in to place. this should solve the problem.
I need to know if the test page that the unit prints as "Demo Page" comes out fine. If this is the case, your problem is within your application (software) or computer connection (check all cables). If this is NOT the case, I'll need to know more about your scenario. Operating system, type of connection (USB, parallel) and what are you trying to print. I'll be waiting.
Your USB cable is either too long (more than 9 feet), or too thin. This makes the connection strong enough for status, but too weak for data transmission. Install a good quality cable and let me know.
×