I get "E224 turn off and back on" message when turning on machine. I checked error codes and it says "blank shutter problem". I'm trying to fix this machine for a local christian outreach program which does not have a lot of money to spend on repairs so any help would really be appreciated
get "E224 turn off and back on" message when turning on machine. I checked error codes and it says "blank shutter problem". I'm trying to fix this machine for a local christian outreach program which does not have a lot of money to spend on repairs so any help would really be appreciated
Clean photo sensor on interimage lamp unit above the drum unit , remove drum unit & toner unit and unscrew nail above drum the unit will go down . clean it and reassemple the machine it will work right
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Canon 6030 E000 Fuser did not heat up E001 Fuser temperature too high E002 Fuser temperature not rising at correct pace E003 Fuser temperature drops E004 SSR shorted E210 Lens home problem E212 Lens home problem E220 Exposure lamp problem E224 Blank shutter home problem E240 DC controller or composite power supply problem E400 Data communication problem E401 Pickup motor problem E402 Belt motor problem E403 Feeder motor E404 Delivery motor E411 Document detect sensor E500 Communication problem with copier E510 Feeder motor E530 Home sensor E531 Staple swing sensor problem E540 Bin shift motor rotation problem E541 Bin motor E710 DC controller E711 Document feeder IC failure E716 Cassette feed IC failure E800 Auto power-off circuit problem E901 Cassette feed motor E902 Paper guide home sensor problem
Basicly, a E224 is a scanning lamp error code. Here's a question for you??? Will the scanning lamp turn "ON" at all? If so, then the problem is with the scanner power cable. If the lamp will not turn "ON" you may have a blown lamp & or thermal fuse on the scanner unit. You can not clear the code until the problem is fixed. Good Luck
error code E401...DF paper feed motor lock...check the motor of your DF...try to turn off the machine and unplug the communication cable from DF to the machine and turn on the machine again...
Is it looking for toner or is there still a jam in it. You may want to try to turn it off and unplug the sorter and turn it back on. If that dose not work turn off again and unplug the adf and turn it on again. If that dose not work if you have unplug the bottom 2 trays. If one of those is causing the problem look deeper in to one of those units. Also, will it showw or flash a error code on the display?
COPIER TURNS OFF WHEN MAKING A COPY
×