Coding insert for universal remote

Hello
Three digit universal remote codes for Sharp tV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four digit codes are:
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

The codes are specific to the model, and Phillips makes several different models. Phillips codes are available here:

http://www.urc.philips.com/

Once you find your remote control in their list, if there is no obvious list of codes, try the Quick Start Guide or the User Manual.

If the guide for your specific remote doesn't have Sharp televisions in the list, try codes 0509, 0913, 0907, 0603, 0002, 0502, 0224, 0228, 0202, 0111, 2550, and 0813.

If none of these work, please reply with your specific television and remote control models.

http://www.support.philips.com/support/catalog/products.jsp;jsessionid=91A283AA4E56E7E23886CE9DE3832F7B.app106-drp1?_dyncharset=UTF-8&country=&categoryid=REMOTE_CONTROLS_SU1_US_CARE&userLanguage=en&navCount=1&groupId=SOUND_AND_VISION_GR_US_CARE&catalogType=&navAction=push&userCountry=us&title=Remote+Controls&cateId=REMOTE_CONTROLS_CA1_US_CARE

If your universal is a phillips magnavox..

Then here is a site that instructs you how to reprogram the remote with the code for your tv.. ( it also has a list of codes for different brands of TV's at the bottom)

http://www.universal-remote.net/philipsmagnavox.html

this should work:

SETTING CODES
HOLD THE CODE SEARCH BUTTON DOWN UNTIL THE RED LIGHT STAYS LIT.

PRESS THE DEVICE BUTTON (ie TV)

CHANNEL UP BUTTON UNTIL THE CHANNEL CHANGES. (300 SHOULD BE MAXIMUM)

PRESS THE MUTE BUTTON TO SET THE CODE

Try http://www.remote-codes.com/

look under remote manuals rca, radioshack, it will lists for tvs vcr ect.

i need a code for phillip universal remote sharp # urc8820

i have a rca tv and a magnavox universal remote and i need codes to program

http://www.urc.philips.com/