How to stop to print the journal after send fax everytime?

You need to set up the Transmission Verification Report and Journal Period in the menu table.
Press Menu/Set, 2, 4, 1.
-OR-
Press Menu/Set, 2, 4, 2.
You can use the Transmission Report as
proof that you sent a fax. This report lists the
time and date of transmission and whether
the transmission was successful (OK). If you
select On or On+Image, the report will print
for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Selecting On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
Note
When the Verification Report is turned Off or
Off+Image, the Report will only print if there
is a transmission error, with ERROR in the
RESULT column.
1 Press Menu/Set, 2, 4, 1.
2 Press ? or ? to select On, On+Image,
Off or Off+Image.
Press Menu/Set.
3 Press Stop/Exit.
Printing reports
1.XMIT Report
2.Journal Period

at the fax parameter ( F7-04) you may look for COMM JOURNAL.
inside COMM JOURNAL, you may choose what will it print. is it always, during error sending, or never print.

that's it :)

Press
Function 74
set
12
set
2
set
stop

you can't. check the journal for the last receive transaction fax number. send a request for re-transmit.

there is no function to print it on the fax you sent but you can have a come journal.

press the following.

function-7-4-start-1-2-start-2"should say always" start stop then this will give you what you want

to set the com journal, press function-7-4-set-1-2-set-2-set-stop

to check the phone number you could look in function-7-1-set- keep hitting set till you see the phone number

Press:
Function
74
set
12
set
2
set
stop

sounds like your firmware might be shot and it needs to be reinstalled, if your in canada i can recomend a tech

I'm not sure which key is used on that model but look for a key that says one of these: menu/user settings/reports/program.

what you are really trying to do is get to your reports programming section, then select tx report, then choose print tx report and will fix your problem, you may want to change you fax number if that number changed also.

mikey