I called haier about this error code. E1 indicates that a button on the control panel or the reomote is stuck. I was instructed to unplug the unit and push each button at least 5 times, one at a time. Plug the unit back in, and this fixed my problem with error E1 and the unit works fine.
I have a voltas veritas AC. I was getting the same error E1 on display on power ON. Reason was malfunctioning of sensor.
Simply replace the sensor and it will work fine.
Last month my error E1 came on my air conditioning unit. It turns out that there was a huge malfunction in the system and it was sensing that. It wasn't worth my time and so I decided to just get a new system and the new installation is working great. I know that normally you don't just go out and buy a new system, but mine was getting fairly old. How old is your system? Air Conditioning Installation Repair near Lakewood CA
SOURCE: Problem with samsung aw0503b
Found this on Samsungs site.Hope it helps a little, at least you know the problem now. If your air conditioner displays E1 in the display panel and won't turn on, it means that the Room Thermistor (a device connected to the thermostat that detects room temperature) is shorted or defective, and you need to have your air conditioner serviced. If it displays E2, E3, or any other E error, you also need to have your air conditioner serviced. To arrange for service, contact Samsung Customer Care at 1-800-Samsung (1-800-726-7864). Have the model number of your air conditioner on hand when you call.
SOURCE: reset air conditioner
This did it for me! Same procedure but its described a little more thoroughly here...
http://sci.tech-archive.net/Archive/sci.electronics.repair/2005-08/msg00472.html
SOURCE: boston innovative products MOB 10KDCHR portable
i found the user manual for it at:
manualfox.com/link/bostoninnovative.htm
SOURCE: error code E1 54 on samsung air conditioner split
A Bit of a late reply but E1 54, is indoor fan fault.
SOURCE: error code on air conditioner
Sharp inverter Air conditione.
After approx 20/30mins the system shuts down and shows a 6 on the display.
Any ideas.
Has been service
The E1 code is an error code that appears on the LED temperature display of some digital air conditioners. The error code could mean anything from dirty air filters to a damaged room thermistor, a safety connected to your thermostat that detects room temperature. Troubleshooting the cause of this error code may improve your air conditioner's performance
12,780 views
Usually answered in minutes!
E1 error code on Sharp AC
Haier HWR05XC1 E1 error code on my machine. Leaving it unplugged all day did not do anything.
My unit stops working only after a minute, an E1 appears on the display. The only way to restart the system is to reset the power adapter. Then the unit restarts and then shuts down again within the small amount of time.
×