I Need to see a schematic for a MS-7050 motherboard, in order to determine how to connect the front panel connections, because they are not individually labeled on the board.How or where can I view one?

www.manualsonline.com/mfg._name/schematics
www.laptopdesktopschematic.com/mfg._name/make/model/
www.datasheetgadget.com/mfg.name/make/model/schematic
www.eserviceinfo.com/mfg.name/make/model/schematic
www.freepruductmanual.com/motherboard/schematic


more info and search site at rod gandy tips and websites at fixya.com

board maybe bad as well check the caps to see if they are good and video card

1) http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph07557&lc=en

2) http://h30434.www3.hp.com/t5/Desktop-Hardware/Getting-a-new-case-i-need-Front-Panel-pinout/td-p/842897

Scroll down to the photo, and pinout, of a 9-pin HP Front Panel header
(No.9 pin. Reserved. It is/was, reserved for the factory.
5 Volt DC test point. It is N/C. Not Connected)

Dear,
Here is a link for all details schematic for your desired motherboard.

http://notebookreparos.com.br/notebooks/mobo-schematics/MSI/MSI%20MS-7318%20-%20REV%201.01.pdf

For its specs in details

http://www.compusa.com/applications/SearchTools/item-details.asp?EdpNo=4222488&sku=M452-2671


best of luck!

You should read manual of the moterboard, there is wiring diagram that you need. But however, i suggest to you - take it to the expert, if you don't know how to do it.

DX-5150 Illustrated Parts Map Refer to Page-2 for Complete Motherboard Connections and Description
Actual Image of the Motherboard (Rotate it 90 Degree Clock-wise for a better view)


(The above illustration is at Page-2 of the Manual)
Please download the Manual and the Motherboard photo from the above links and make the Front Pannel Connections.

Hope it helps! Good Luck!
CreativeTECH

http://msi.com/service/download/manual-4446.html

Power cord will only go on one way ... usb normally at the rear of the board as are the in, aux and output.

Ignore the *** above!!
The ms-7050 is an OEM board mate, taken from the HP DX5150 PC, there is no manual for it (being OEM)

The pinout can be found in my link, i found it after a HELL of a lot of searching, so hope you appreciate this, lol

http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?prodSeriesId=447468&prodTypeId=12454&threadId=1214287&admit=109447627+1272844525284+28353475

Usually schematics are not provided. Try requesting the manufacturer or visit http://www.devicemanuals.com . May be you find it. ([email protected])