-
Kodak Master
4,338 Answers
- Posted on Nov 23, 2010
Re: I just replaced both ink cartridges in my esp3...
You need a new Print Head:
Clean the printhead, then print a test page.
- On the control panel, press and hold Cancel + Copy/Resume simultaneously until the On/Off light flashes. The On/Off light continues to flash during the cleaning procedure.
- When the On/Off light glows steady, press and hold Quantity + Cancel simultaneously until the On/Off light flashes, then wait for the test page to print.
- Review the printed test page and verify that:
- the left color blocks are gray, cyan, and black.
- the right color blocks are magenta, yellow, and black.
- each block is completely filled with color.
- Is the test page blank?
- 1-800-421-6699,Call Kodak to Report Code BP03
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
×