Hi, My Keurig is heating water but water will not brew through machine. Help! Thanks, Cynthia

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

][
=-=-

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101;
][[]

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101

Hi,

There is air in the lines and it is blocking the water flow...
Here is a tip that will help you getyour Keurig to prime...

Keurig CoffeeBrewer will not prime
heatman101

Hi,

Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.

Keurig Coffee Brewer not making a full cup of Coffee

heatman101


[]\]\]\]\]\]\]\]\]\

Hi,

Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.

Keurig Coffee Brewer not making a full cup of Coffee

heatman101


,./-=][\

Hi,

Here is a tip that I wrote that will give you some things to try that will help you get your Keurig coffee brewer working again.

Keurig Coffee Brewer not making a full cup of Coffee

heatman101

[][';';

Same here. (I have the Mini Plus B31) Called Keurig and these are the steps they walked me through. Not sure which part actually fixed the problem, but it worked.

1. Turn off machine. Using a paperclip clean out the holes in the needles (3 in the top, one in the bottom of the k-cup holder).

2. If water is inside the heating core (assuming it is as nothing happened when you tried to brew), with the machine turned off, press and hold the brew button. After 5 seconds the pump will kick on and discharge the water. Make sure you have a cup in place to catch the water.

3. Dispose of that water.

4. Unplug the machine.

5. Wait 5 seconds.

6. Plug machine back in.

7. Turn on.

8. Run empty cycle without a k-cup and only use the minimum amount of water (6 oz).

9. Dispose of that water after it brews (hopefully).
If still nothing is happening, call Keurig.

10. Brew your coffee, tea, choco, etc.

Note: was told by Keurig rep that whenever you use hot chocolate, to run an empty rinse cycle afterwards before brewing another cup. This will help prevent any choco from going up inside the machine and possibily blocking the water flow.

Hope it works! Mine did after following these instructions. The rep also wanted me to measure the amount of water that came out afterwards. Not sure what the next step would be because my call got dropped, but the machine works. Sipping on a cup now...