The instruction manual that I got with my machine is possibly the worst manual I have ever used. The pictures look as though they were drawn with a wide marker & the explanations are very incomplete. Is the manual that comes with a machine when bought new the only one available? Sandra LaMothe

Possibly a Tacony FA6724 which I believe is a rebrand Riccar. Google search " riccar sewing machine" and compare pictures to yours.

try Looking up a video on youtube. there are alot of videos on threading a sewing machine. most machines are threaded the same way. and sometimes (like my machine) have numbers showing where you thread and in what order from 1 to (however many steps there are.).

https://www.manualslib.com/manual/1081647/Yamata-Fy750.html

Let us know if this the right manual or not, please. Please verify that the sewing machine is a Yamata.

Yamata FY750 Instruction Manual

Am unable to locate a picture of your machine, but the attached link is threading instructions for a 416. Perhaps it is close enough to your machine model to be beneficial:

Euro Pro 416 Sewing Machine Threading Diagram

Oh yes, one more HINT: ALWAYS RAISE the presser foot when threading the top thread!

Otherwise, search for:

Make Model threading

and see if anything comes up that is helpful.

Or try this manual:
https://www.manualslib.com/manual/918249/Euro-Pro-415qv.html?page=16#manual

Remember that sewing machines basically operate the same. Even though the design has changed over the years, the threading process and sequence remains the same.

The top thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle
8. Try a different spool or cone of thread
to find a manual, we have to know the model number of the machine
to to

I LOVED these Touch and Sew machines! The bobbin is wound in place in the bobbin case; you just flip a lever on the left, and it will start to fill. However, you should download your instruction manual free from the Singer Sewing Machine site; it's pictured and discussed on page 7.

A heads up, though; those bobbins were available with a metal piece in the center and without; from the drawing it appears that yours takes the one without anything but a hole in the center. I owned BOTH types of machines at the same time once, and I had to be careful as to which bobbin I used in which machine.

here's 2 link for a manual, different prices
http://www.sewingpartsonline.com/instruction-manual-pfaff-1469.aspx


http://www.sewingpartsonline.com/instruction-manual-pfaff-1469-download.aspx

I need a manual for the Featherweight, too.

i have found instruction manuals for several machines. type in the model # and make of machine in your search engine and you should see it on the list of options

Sorry couldn't find a free manual - check here though, they are only $10; http://www.sewusa.com/Sewing_Machine_Manuals/kenmore_Sewing_Machines_385.htm although they dont have the exact manual for your model, the oiling instructions should be the same for all the 385 models. it is a good site - you can contact them direct for more info and you might get lucky; http://www.sewusa.com/index.htm These guys are also worth a try; http://www.sew4less.com/manuals.php They claim to offer a manual for your exact model, but the picture shows a generic manual which they say will offer the same info Hope this helps, good luck, please post again if you need more help :)