Asa 5505 hi how r u various coomands to configure the asa 5505

HI,

· Please check the whether the security level for DMZ and outside interface, If DMZ is high security level. Please do the NAT configuration
· If it's having the same security level. Please issue the command "same-security-traffic permit inter-interface "in the global config mode.

Please check the upgrading the software in the below link
LINK

Remove all Ip details who are belongs to not working ISP.

1. Please check your printer's IP address and port number is permited in your cisco firwall or not.

Use the Cisco ASDM or SDM software, that will give you an easy graphical interface to configure the ASA. One of them would have been shipped with the device.

Don't forget the ASA has to pre-configured, just a simple config. Have HTTPS enabled and telnet/SSH helps as well if you dont have a serial port or the console cable.

Cisco's website will give you quite a lot of info for free...

Yes, it is possible and Yes you have to purchase it from Cisco.
Sorry, that is how they make the big bucks.
Consider a service contract on the unit, then you can download the firmware much cheaper.

1. Change your PCs default gateway to your firewalls' internal IP

2. configure the nameservers on your ASA

Then internet will work fine.

Hi, the Cisco ASA 5505 is the base model, and URL filtering is not available on this model. The first model that allows URL filtering is the 5510, and every model above that. You can view the models and features here:

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

You can do this, For your ref i hv given you a link

http://channel9.msdn.com/forums/9GuyAroundTheWorld/251722-Cisco-Pix-to-Windows-Vista-Native-Client-Using-L2TP-IPSec/

A conflict in the IP address, resolve it