Why is my coffee coming out light colored? - Faberware FCP412 Coffee Maker

Make sure both nozzles are clean. One is in the top and one in the removable bottom. Ream them with a paper clip to make sure they are clear.

Reset the amount of water on the Pad.

Hi. either your grind is too coarse or pump pressure is not right. Too low. Dazza REPAIRER

hi, this morning I was making a capuccino, and the first part was fine, the expresso was fine, I waited for the light to change colors, open the lid, put disc with the cream in the machine and the green light won't come on, only the yellow on the left hand side and is not working<br /><br />

there is excess water that comes from the injector when the brew group disinguages it. make sure the path is clear of coffee grounds in such. Some other things to check are the conditions of thr o-rings there are to 2 on thr injector inside the machine and one on the brew group if there damaged at all they will leak.

You are using the wrong filter for that unit

OR

Not enough coffee

I think I have the right manual. Page 29?

http://products.saeco.com/articolo.asp?id_linea=1&id_articolo=740823049

Make sure you are not using the paper filter and the permanent filter at the same time. Make sure the chute undernetah the grind basket is clear of grounds, moisture.

Not clear on "Empty bean container/full grounds drawer) - not empty/not full. " But I gather that coffee is not being dispensed. Most Likely the grinder needs cleaning + brew group needs cleaning ( filter ). Do you get water/steam?

Our light comes on all the time and it has continued to work for close to two years. However, now we are having problems with it so I am not sure if you should worry about it or not. But it did that from the first day we owned the machine so I doubt it is a problem...