How would I change the color panel on the door?

Yes. Go to Searspartsdirect.com and enter the model number. If other color panels are available it might list them in the parts list. If not, you have to figure out the model number of the same dishwasher in the color you want.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jeffrey_634abadf963e31e5

YES THIS IS POSSIBLE IF YOU ENTER YOUR FULL MODEL NUMBER ( YOU ARE MISSING SOME OF THE NUMBER) ON THE SEARS SITE THE ILLISTRATED PARTS BREAK DOWN WILL GIVE YOU CHOICES OF COLOR.
http://www.searspartsdirect.com

light blue = lock white = unlock in drivers kick panel

yes but you would be better of removing panel and taking it to your nearest powdercoater may be cheaper cheers

Hi, W/D here.

Your panel may be able to be changed. Look at the top of your panel for a trim piece held in place with screws.. Remove the screws and try to slide your panel front up and out. If it will come out like this, you can change your color very easily. In fact, some dishwashers came with 2 panels with each side painted a different color (harvest gold or avocado green anyone?). If your panel will not come apart, all is not lost....
I have seen panel covers available on EBay, in the dishwasher section. Some are sheetmetal and some were like sticky backed foil. If you're going stainless, this might be the route to take.
If you are artistic, you can mask and paint the panel with either a spray enamel, or one of the newer plastic paints. Not crafty? remove the door and take to an auto painter. I know for a fact that most of them will paint a refrigerator (ahem), so a dishwasher can be done as well.
Hope that this at least sparked a few ideas! Best regards, --W/D--

If your model number is correct you can find door panel parts at appliancepartspros.com. Type in your model number and look under Section 3, Door and Panel Parts for item 4. There are several different colors available including black and stainless. Make sure you select the correct part number. I hope this helps you.

Well you can get a stainless steel panel cusot-made at www.applianceart.com. They have a lot of options. One of them is stainless. The options are a vinyl sticker, a magnet, static cling or the actual stainless panel. Most are $39 and the metal is $99 I think. Good luck.

Panel and Trim kits consists of acrylic, stainless steel, or colored steel panels with a high quality anodized brushed aluminum trim to give your appliance ...
www.kitchensource.com/kau/frigo.htm

On the 2550 you have a door on top of the machine with a blue button next ot it. When you push the blue button, the door will open and you will see one of the toner cartridges. If that is not the one you want, close the door and follow the instructions on the panel. To remove toner, rotate back on the top of the toner and lift out.

The door panels are reversible. Slide it out and turn the panels around. Bingo! Your done. It's that easy.