How to pair the samsung wep450 with another cell phone

SOURCE: I need the access code to pair it to my cell phone.

Hi,

Follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Explorer 3XX device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

So - 0000 (four zeroes)

hope this helps

Season's Greetings from Fixya!

Chris (ziraffa)

SOURCE: How to pair up headset with cell phone?

first ul hav to press the button(big one) for a lil while..let the snap b closed...the light wud change to purple...then at the same time set ur bluetooth on the samsumg mobile to discoverable mode....snap open ur bluetooth and in ur mobile it will ask for a pass key which in default is 0000...then it will get connected

Thanks for using Fixya
keep me updated for further assistance

SOURCE: I can't pair my WEP410 with SonyEricsson Naite

To set the bluetooth please look at link below.

https://techtrain.samsungwireless.com/tekweb/Misc/Main/Accessories/WEP410_QSG.pdf

Good Luck and please rate 4 thumbs for the free answer