Posted on Jun 21, 2008

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

KENMORE ELITE OASIS HE CANYON CAPACITY DRYER

My Dryer is beeping and showing error code CF then it beeps again and shows 01 02 on the mins remaining. I tried to unplug the dryer from the socket but it still happens. Please help...I dont know the Error code CF means. I am having same problem. After plugged back-in it will say CF 03.. then after a bit 01.. Sometimes 01 02 03. And sometimes when turn on it will start cycling through a bunch of #s on the display. I went through some of the repair sheet stored in the control panel area and did a few diagnostics tests. It looked like the "machine control electronics" so I ordered and replaced that. Didn't fix it. So, I did some more diagnostics and it looked like the thermistors so I replaced those. Didn't fix it. HELP!
My model Kenmore Elite Oasis Canyon Dryer = 110.67086600

uwiklsp Jul 09, 2008

I have a Kenmore Elite Model 110.6703 that keeps beeping and the lint screen light is on constanting. I have cleaned the lint screen, cleaned the hose from the dryer to the wall, washed the lint screen, taken the contraption off where the lint screen is and cleaned as well and nothing seems to work. Also it beeps when it is plugged in. It has a mind of its own. Sometimes it will work fine but most of the time it won't even turn on.
dlucy Aug 19, 2008

I have the same problem with my Kenmore Elite Oasis Dryer. It beeps and shows an error code CF 01, 02, 03. Have no idea what this means and can not find any workable solutions anywhere...not in the manual or on the internet. I have had problems with my Kenmore Elite Oasis Washer/Dryer since the 2 year point of ownership. I had to have a computer control panel replaced on my washer about six months ago and now I am having what appears to be control panel problems with my dryer. Disappointed does not even describe how I feel about the $2,000 I wasted on this washer/dryer set. At this point, I am ready to just accept my loss and buy a new set.

1 Answer

Anonymous

Master 525 Answers
Posted on Jun 22, 2008

Anonymous

Master

Joined: May 23, 2008

Answers

525

Questions

Helped

270939

Points

1508

Below is a link that will help you with parts and diagnostic procedures that are specifically tuned to your manufacturers data plate information. This model is manufactured by Whirlpool, so maybe you can locate your model's failure codes.
http://www.repairclinic.com/0078.asp

If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)
"Your satisfaction is my personal reward"

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I keep getting f1 error

In the event of an F-1 error try the following steps before replacing the control. Blow through the tubing to tub to make sure no obstructions is in there, make sure the tubing is airtight, make sure the tubing does not have a hole in it if all of that don't do it then watch the following video:
It is a rotor position sensor replacement video which pretty much shows what is involved with the tubing going to the bottom of the tub.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer

Jan 03, 2013 • Kenmore Oasis 4.6 cu. ft. Canyon Capacity...

0helpful

1answer

My Kenmore Elite Oasis dryer has a CF code and continuously beeps. Running or not.

The CF error is a communication failure between the main computer and the touch panel...you may have a bad or weak connection or a bad computer..I wold recommend that you contact your local Sears and ask them about recalls, and for service should this happen again.

Read full answer

May 07, 2012 • Kenmore Elite Oasis 6808 Electric Dryer

1helpful

2answers

In mid wash the Kenmore Elite Oasis HE flashes F51 and

check if basket turns freely. if it does replace the main board

Read full answer

Jan 28, 2010 • Kenmore Elite Oasis 27052 Top Load Washer

0helpful

1answer

I hadn't washed any laundry for a couple days and then my Kenmore Elite Oasis starting beeping in the middle of the night. My husband had to unplug it because it wouldn't stop. The next morning I did some...

According to the Whirlpool Cabrio (Sears Oasis) manual, this code indicates a "stuck key"

Keypad/User Interface Failure
F then 2 flashes when in:
• Diagnostics Test mode if a stuck key is detected.
• Standby mode if there is a user interface mismatch.

Following is the PDF of the manual.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf

Read full answer

Sep 22, 2009 • Kenmore Elite Oasis 27052 Top Load Washer

3helpful

1answer

My kenmore elite oasis washer will not turn on. I

its the power button its a common prob use a soldering iron and switch it with the load sinal button this happpens as the washer alallows moisture to get on the board as its not protected it will save u a ton of money and anyone can do it

Read full answer

Apr 26, 2009 • Kenmore Elite Oasis 27052 Top Load Washer

0helpful

1answer

Beeping dryer & broken hinge on the washer

1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Read full answer

Jan 20, 2009 • Kenmore 24032\24036 Top Load Washer

1helpful

1answer

Kenmore oasis electric dryer beeps and displays code F45

We had this error on our machine for about a year before we finally got sick and tired of it. Our dryer was purchased in 2006.

Here is the solution: the code means there is an error on the thermistor. Our thermistor was loose, as were other electrical wires. My husband tightened up all the connections and the thermistor, and we have never had this error again.

However, we will never buy these machines again either, because we have had numerous other errors on the washer and dryer.

Read full answer

Nov 19, 2008 • Kenmore Oasis HE 27082 Top Load Washer

0helpful

1answer

Kenmore Elite Oasis 110.6703 is BEEPING!!! ARGH!

repl./// user interface board stuck button common problem

Read full answer

Oct 13, 2008 • Kenmore Elite HE4 Electric Dryer

0helpful

5answers