I beleive there are only two paper sensors for that machine.
1- in the tray there is a paper empty sensor which hangs down,
make sure you take out the tray and look for any pieces of paper stuck.
2- open right door and look as if your looking inside to where the
paper is supposed to end up. The sensor is in that black unit, is there
any paper there, can you see a black lever, if you pull on it gently
and let go does it snap back in place?
Http://www.xeroxprinters.com.hk/xerox/eng/service/customer.jsp
Try this site for more information about your problem.
or call fuji xerox hotline 2513 2646
thanks.
You need to check the paper tray and roller sensor
Please provide the serial #
Remove the paper tray remove all papers check the tray it self for paper dust accumalation then you can check the paper picker sensor open the printer remove all the cartriges and check fro paper jam too then close the printer turn it off for 5 minutes unplug the power cable, reconnect the cable and replace the paper tray and then the cartridges. Should resolve the error.
×
427 views
Usually answered in minutes!
thanks - I will follow that through
×