Cant go on 1024 resolution - ASUS P4S533-MX Motherboard

u cant thats the maximum resolution u get out of ur laptop

You may need to change the screen resolution.
Go to Control Panel - Display - Settings tab - in Screen resolution, move the slider to 1024 x 768 and Apply.
If you cannot increase the screen resolution then most likely the incorrect video driver has been installed. Install the correct video driver and you will be able to increase the screen resolution.

The LG L1715s can support resolutions between 640 x 350 up to 1280 x 1024 @ 75Hz. The recommended resolution is 1280x1024 at 60Hz. The manual is available here: http://www.lg.com/uk/support/product/support-product-profile.jsp?customerModelCode=L1715S&initialTab=warranty&targetPage=support-product-profile .

The preset modes are:
VGA: 640 x 350 @ 70 Hz, 720 x 400 @ 70 Hz, 640 x 480 @ 60 Hz
MAC: 832 x 624 @ 75 Hz, 1152 x 870 @ 75 Hz
VESA: 640 x 480 @ 75 Hz, 800 x 600 @ 60 Hz, 800 x 600 @ 75 Hz, 1024 x 768 @ 60 Hz, 1024 x 768 @ 75 Hz, 1152 x 900 @ 65 Hz, 1280 x 1024 @ 60 Hz, 1280 x 1024 @ 75 Hz

I hope this helps.

Cindy Wells

Just right click on your desktop and take properties and then choose display settings and then you will be able to change your desktop resolution as you require.


Good Luck

Start-up in "Safe Mode".
Set the video-resolution to 800-by-600 at 60 Hz.
Shutdown and reboot.
Set the video-resolution to 1024-by-800, and "test" the setting.
Set the video-resolution to 1024-by-1024, and click to "test" the setting.

Connect it to a different computer, e.g., a notebook computer,
and set the screen-resolution to 800-by-600, and see if the monitor works.
Change the screen-resolution to 1024-by-768, and try again.
Change the screen-resolution to 1280-by-1024, and try again.

Connect a different monitor to your computer,
and set the screen-resolution to 800-by-600.
Then, disconnect the "alternate" monitor, and connect your monitor.
Change the screen-resolution to 1024-by-768, and try again.
Change the screen-resolution to 1280-by-1024, and try again.

go to safe mode

Check your grahics card to make sure it supports higher resolutions. It may be that you have it already set to highest supported by your video card. Hope this helps.

If you have a button if the front of the monitor that automatic sets the best resolution, press it, if not, rightclick anywhere on your monitor, select preferences and change the settings there
The recomended resolution for your monitor is 1280 x 1024, thats also the highest resolution your monitor suports. Start whit the resolution 1024 x 768 and set the mgz to 70. I think that should do it for you.

Good luck

reduce the number of colors until you can get a resolution that works the monitor cant handle the number of colors and the number of lines of resolution this is a common problem with older monitors.

l8r