At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to solve model c360 konica minolta the printer...
There are two ways to solve this issue, First you can replace the whole transfer unit or you can install a new un blown fuse to rest the internal counter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P5 front IDC sensor failure.Wipe clean the surface of the transfer belt if it is dirty with a soft cloth or change the transfer belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum cleaner after remove the all imaging units and the transfer belt unit.
RE[place the transfer belt, open the right door, that shiney belt is the image trans fer belt that has the image on it to be placed on the media (paper) right above it is there a small plastic device in the middle that looks like it could cause your dots it was bad design that little thing prevents paper from riding on the belt
P 21 Color shift test pattern failure.Relevant electrical parts is the image transfer belt unit. Wipe clean the surface of the transfer belt with a soft cloth if it is dirty.Change the image transfer belt unit if the transfer belt is damaged.Clean the 2 sensors located upper side of unit.
P - 26 1st image transfer ATVC black failure P - 27 2nd image transfer ATVC failure P - 29 1 st image transfer ATVC colour failure Check the transfer belt unit contact and that of high voltage board for connection and clean or correct the contact. Change the image transfer belt unit. Clean the sensor windows on the transfer belt unit.
1 Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty. 2 Change the image transfer belt unit if the transfer belt is damaged. 3 Change the PH unit. 4 Change PRCB.
run halftone prints from service mode to isolate which color is having an issue.
×