Starlite NextPlay Ipod docking alarm clock radio

Setting the clock for the Ipod docking station
NP105CR

Press the set button 3 times until all the digits for the main clock are flashing. Press the skip forward and back button for hour and volume up and down for minutes. Press set button once to confirm and exit the setting menu.
866-387-2027 for manual

Press the SET button to highlight which alarm (1 or 2) when it flashes press the function button up to 4 times to roll through the settings for which alarm you want to go off - IPOD, radio, buzzer. The fourth is OFF and OFF will start flashing. When OFF starts flashing, then stop and do not do anything for 5 seconds. Then the alarm setting of OFF will be intact. If you put on BOTH alarms, you will need to do this with alarm 2 as well. When you get back to the time if you have done it right, no alarm mode will be showing.

The Alarm is controlled by the Set button. Press Set once, then press Function to cycle through Alarm 1 functions until the display reads OFF. If needed, press Set again, and press Function until Alarm 2 also reads OFF. Press Set a third time, and you can set the main time with the Vol +/- (minutes) and the Skip (hours) buttons. Press Set a fourth time to return to normal display.

I had that same problem too and i had to take my i-pod back because my machine messed it up so thats probably what your going to have to do to the repair shop said that there was nothin they could do and I was better off taking it back and my docking station messed it upso I had to get another i-pod and a docking station-I hope you get the problem fixed

Setting the Clock:
1. Press the SET Button 3 times until all digits for the main clock are flashing.
2. Press Skip forward and back to change the hour and Volume up and down to change the minutes.
3. Press the set button once to save.

This is happening to my daughter's dock/clock too. It seems to have a short in the connection. If I jiggle it around I can get it to connect for a minute. Less than a year old, wish the warrenty was longer than just 90-days. Anyone know how to fix this problem?

on the top of the dock is an alarm button (clock) hold that down...will start to flash...go press the function button until u get to off...thats it!

nope...there is nothing u can do..sorry.

I was in Target today, and opened one of the product boxes, looked at the operations manual, and here's what it says: to set the time, press the "set" button (the button on the right with the clock icon on it) three times (relatively quickly); all the digits on the clock should be blinking.  Use the "skip" buttons to change the hour, and the "volume" buttons to change the minute.  Press the "set" button once to confirm the time and exit the function.  I tried it this way, and it worked perfectly for me.  Good luck!

if it has a battery try replacing it