I am having a problem finding out how to do a mirror image and where to send my scans to myself on my Pixma MX330

In the printer driver settings, where you can select the paper type, you have to choose "other paper" and select "T-Shirt Transfer".

first your scan page put in the scanner and the press scan key other wise computer use scan software to scan.

I have a canon mx330 fax print and scan all in one printer
To scan without ink just hold the back button in after the ink message comes up it should eventually take you to the main menu then you can hit the scan button.

Step #1 - Have the printer powered up and plugged into Mac.Step #2 - Open "System Preferences" and the in the "Hardware" selection select "Print & Fax".Step #3 - Drag down the menu bar on the left side until you reach the bottom were its labeled "Scanners" Step #4 - Select the scanner that you want and began scanning.

Hi,

You can download the software from manufacturer's support website by clicking this link

On the page which opens, select the operating system of your computer (Windows XP/ Vista..) from the drop-down menu (See attached image).

Then download and install the required drivers and software.

The list of available software and drivers will load only after selecting the operating system of the computer.

Hope this solves your problem. Thanks for using FixYa.

Hi davidbetta21
Download the latest driver from
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx330#DriversAndSoftware
Works only under Vista and/or Win 7
Regards ,
fanaudi

Check in your settings for media type (plain paper, photo paper, etc.) and see if there is a T-Shirt Transfer media type. If not, you may need to use a graphics editing program that has an option to "flip horizontally" before you actually send it to the printer.

Go To Canon support - Under Search punch in mx330.

I think this link will work:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=18120&kbpage=yes

They are not in the middle as shown in the manual. I still can't find them. God! this printer is only that big and I spent three days looking at every possible corners and gaps and still can't see where the ink cartridges are. Will not buy this Canon printer again.

Hi, you must reset the machine in the factory setting mode.