West Bend 33600 Coffee Maker Logo

Related Topics:

Posted on Nov 16, 2010

P139-97 is blown. Cant find a replacement - West Bend 33600 Coffee Maker

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Apr 09, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 09, 2013
Answers
2
Questions
0
Helped
940
Points
2

Couldn't get part from Heritage. Found company called Senasys. Their part number is 2511L006 Temerature Switch (350 L-2169 Open at 350 Close at 100 (+/- 10). It's slightly larger, so you can only put one mounting screw in, and you have to center it so the contacts don't touch. But it does work and solves the Problem. The company that makes the origional part in China offered to send me 200 but who needs that many. With shipping this was about a $18.00 fix.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 4 Answers
  • Posted on Jan 13, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jan 13, 2011
Answers
4
Questions
0
Helped
1667
Points
7

THE PART NUMBER HAS BEEN CHANGED IT IS P200-97
YOU CAN FIND IT AT HERITAGE
THE PHONE NUMBER IS 1-800-458-5593

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1984 Buick Riviera. Transmission main seal replacement.

not told at all which end leaks (the exact spot matters)
I bet there is lots more wrong !
when did car last run good, or not leak ATF
last week,, last year, last decade? what?clues help.

history matters on all and service done. for 39 years
last owner left the pan loose and 2 bolts left and 5 turns loose, we cant see under any car.
front seal blown on or behind TC
rear seal; blown
pan gasket a wreck
pan hit rocks and cut and leaks
side shifter rod seal blown
or sensors on it leak (VSS)
governor cap seals blown./
more, sure.
1helpful
1answer

My ILO tv wudnt come on aftr elec was off dring storm.Was plugd to a surge protectr.A tv tech taught me simple solution a few yrs ago but I cant recall. Help plz. I want my tv on again. Thank you.

Hi there!

Get somebody to check the circuitry of the tv please start with power supply section may be a fuse as blown if blown replace it or a component has blown due to AC .
0helpful
1answer

I PUT A NEW BATTERY IN MY 2005 FORD ESCAPE AND NOW THE DASHBOARD LIGHTS WONT COME ON AND I CANT OPERATE THE RADIO OR REAR VIEW MIRRORS

When you replaced the battery, you may have blown the fuse that runs all of those accessories. I would check your fuse panel for any blown fuses.
0helpful
1answer

My speaker on the back of my Evo 4g is blown. is there any way I can fix it myself. Or is there a store that could fix it for me?

i dont see why u cant replace blown speaker,,,check compaq support website for manual,,or options on what 2 do,,ther very helpful
0helpful
2answers

Will not turn on and orange light flashes when charging

It could be that the F1 or F2 fuses have blown on the DS motherboard. Either you get them replaced or solder the blown fuses back together. Isn't too hard, if u cant do it yourself, just take it to a repair shop. Watch the YouTube video for more help.">
0helpful
1answer

Do not have manual for ford f150 need to know which fuse to replace to fix the cigarette ligher

take them out one by one and check them until you find the one taht is blown. Most fuses have a wire between the terminals that is visible. If there is no wire connecting them its blown. If you cant see these get a continuity tester if it doesn't beep fuse is blown
1helpful
1answer

Elddis caravan porch light bulb blown cant remove cover

Take a pair of safety glasses, work-gloves, and a hammer, and swing the hammer to break the cover. Remove the whole unit, and replace it with an energy-efficient LED light & socket.
0helpful
1answer

Sony color TV model kv-c29 11d blown power supply ic and transist

There should be circuit designations printed on the PC board. Without those, there are too many possibilities to give you anything useful. Can you provide those please?

Thanks,
Dan
0helpful
1answer

Replaced the convergence ICs

If you replaced both ICs you may have a blown resistors usually the 1.8 ohm 1 watt resistor or the other ones next to it will be blown if you still cant do alignment after repalcing ICs
Not finding what you are looking for?

275 views

Ask a Question

Usually answered in minutes!

Top West Bend Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a West Bend Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...