How do i turn on the key lock mode so it does'ent press bottons in my pocket

Special Calibration- If the display shows [OUE2] after turning on: 1. Turn OFF the scale. 2. Press ON/OFF key briefly then immediatley press and hold the MODE and TARE buttons simultaneously until [CAL] is displayed. Release the MODE and TARE buttons and a random internal statement number will be displayed. 3. Press the MODE key once and the display will show [2Ero]. 4. Place a 200g weight on the center of the platform. Wait 2 seconds then press MODE key again. The LCD will display [PASS] then [200.0]. 5. Remove the weight and turn off the scale. Special Calibration is complete.

You can try going to manufacturer's website to see if there is a firmware update. You can try uninstalling a reinstalling the application/drivers for the device as well.

Use the ENT key for data entry.
So press mode 1 for stat then type in the value e.g. 23 and press ENT.

Hello,

The duplicator has a usb option that needs to be selected via the duplicator controller menu. If your duplicator menu currently reads 1. Copy scroll up using the up arrow key to look for the Usb Mode. You may be prompt to switch to the Usb Mode by pressing Ent. Once you do so the duplicator will reboot and the drive should be available through the (My) Computer screen on your personal computer. If you do not see the Usb Menu option on your duplicator menu you can turn it on by holding down the ESC until you hear a beep. It will display the Adv Setup Menu. Scroll down until you see "Usb Option", press the ENT then scroll down to select the ON position and press ENT. After the Usb Option has been turned on you should press the ESC button twice then scroll up until you see the USB Option, press ENT to view the option then select to turn in ON and press ENT. Feel Free to give us a call if you have further inquiries.

Tech Support - Johnny
Produplicator

866-817-4094
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}

Hello, The send key can not lock itself on accident. You may have liquid damage on that key. You can contact wireless image 303.482.1288 they maybe able to assist you on repairs.

can be done from the Front panel of the printer:
1. press MENU for MENU MODE
2. press FWD key to PRINTER OPTIONS
3. press ENT
4. you will see MODULES, press ENT
5. press FWD to FORMAT MODULES
6. press ENT
7. press FWD to Y MODULE, press ENT
8. press ESC to back out of menu mode. Make sure to press Y when asked to save changes.

Hope that helps !

Hello christheline,

First make sure that the amp is powering up properly and that the input and subwoofer(s) are connected.

Check that the amp is not in "safe mode".

1. Press the MODE button.
Press the UP or DOWN button until “9” is displayed.
2. Press the ENT button.
3. Press the UP or DOWN button until “9-1” is displayed.
4. Press the ENT button.
5. Use the UP and DOWN buttons to turn safe mode ON.
6. Press the ENT button.

If this does not work, either the input from the head unit, the subwoofer(s), or the amp itself is probably defective.

Hope this helps.

When you press the eject botton while pressing down the stop botton on the unit in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press the eject botton while pressing down the stop botton on the unit in standby
mode.

I was here originally with a problem identical to one posted and found that the best solution posted was only partially working. My husband and I were able to get the tv on but that was the extent of it. Once on the remote was not working. Out of frustration we figured out the that if you practice the exact steps after the tv is turned on, 
1 hold the set button untill the red light comes on 
2 press what you want to set (tv,vcr,dvd,ect.)
3 press power botton aim at unit and wait until it turns OFF then quickly press ent.  This did it for us and we are now happily watching tv again without having to toss our beloved giant remote into the garbage. Hope this helps!!!!

The Proline manual (comes on a CD with the player) says:

6.3.7 Key lock
This function sets a time delay from when key lock function is started or the player is switched on, after which the player will automatically stop responding to the control buttons. Pressing any button will then display the message ‘Locked’. Key lock is useful, for example if you put the player in your pocket and don’t want any buttons to be pressed accidentally. The time delay is to let you start playing the music and so on. You can choose a delay of ten or thirty seconds, one, three or ten minutes, or you can disable key lock completely. •
Press and hold the V+ button for a couple of seconds to temporarily unlock the keys.