Error code 5 on CANON multifunction

printers are cheap buy a new one or look in a dumpster where university students live and have been throwing out junk cuz they are done with school.

you cant refill this cartridge you need to buy new one and replace to old cartridge

canon ix7000 Error code b300 - install new drivers dowload at http://support-th.canon-asia.com/?business&lang=EN.

It means 'Replace Ink Cartridge'

Hi Good day!! Turn on your printer and open up the cover the printer head should go center after that remove the ink cartdridge and then you can replace it after replacing close the cover and wait the printer will now charging the ink. Note be sure to lock your ink cartdridge properly if not your printer will not recognise your new ink.. Hope my solution helps you!! Thanks!!

This error mean "non installed or defective print head".First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist you need to replace the print head.It's part number is QY6-0057.

Reinstall the software. Might do the trick

MCL

I had a similar problem (error Code:2,140,2) in Canon PIXMA MP250 all-in-one, and it was solved when I replaced both ink cartridges which were in low ink (almost without ink). I know an scanner problem is not supposed to be in relation with ink or printer problems, but that's the way I've fixed it. Good luck!

One way is to hold the 'Stop/Reset' button for at least 5 seconds until the display shows a new message about ignoring the current ink condition. This does not reset the chip but it does allow you to continue printing with the refilled ink tanks.

Canon support code 1660 indicates a cartridge error. It usually occurs when you do not install ink cartridges properly into the printer. As and when it shows error 1660 with your Canon device, you will not be able to take the printing session further. Also, you will notice that the printing process becomes slow and sluggish. When your Canon Printer strikes with error 1660, you will notice that the orange light of your device will blink four times.

This error can even make the printing process slow and sluggish. If you want to experience hassle-free printing, then you have to troubleshoot the Canon support code 1660. If you are a Canon printer user and facing this problem on your device, just go through this article to fix this error quickly.

Some Reasons that make Canon support code 1660:

>>Improper installation of the ink cartridges.
>>Misplacement of the ink cartridges.
>>Damaged or clogged ink cartridges.
>>If the printing machine is not eligible to recognize the ink tank then you may face this error.

Don't take tension while Canon support code 1660 appears on the screen. if you want an instant solution or Expert advice checks the mentioned blog.