1st You download Webcam Driver.
drive
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Hello
The Creative Webcam Instant, like other computer devices, requires driver software. Once the driver is downloaded and installed, all you have to do is connect the webcam to your computer.
Click "Start" and then go to "Control Panel."
Click on "Category View" in the left pane of the "Control Panel" dialog box if you are in "Classic View." Click on "Performance and Maintenance."
Click on "System Restore" in the left pane of the Performance and Maintenance dialog box.
Click on the circle next to the wording "Create a restore point." Click "Next."
Enter a name for the restore point in the box under the heading "Restore point description:." Click "Create." The restore point will be created and your system will return to a working state within minutes. This process keeps your system safe in case there is an error.
Open your computer's Internet browser.
visit the Creative WebCam Instant driver's website.
Click on your computer's operating system name: or "Show all available drivers."
Click on the link "Download Creative-Labs WebCam Instant Creative WebCam Center v.1.71.02 driver."
Click "Save" when prompted. Navigate to the directory where the file is saved. Double-click on the file to open it.
Follow the on-screen prompts to complete the driver installation.
Plug the Creative WebCam Instant's connection cable into any available Universal Serial Bus (USB) port on your computer. Your computer will recognize the camera and process the camera's driver.
Open a chat client like Yahoo! Messenger, Windows Live or similar application.
Click on the "Webcam" setting within the chat client to activate and use the Creative WebCam Instant camera.
Disk management utility will help you see all the drives that are connected to your computer, including internal hard drives, CD or DVD Drives, and removable storage like USB sticks and external hard drives. Using this utility, you can check for attached drives that are not visible in windows when attached to your computer. You can also format drives, change drive letters, mark a partition as active and delete partitions. A word on caution about using the Disk Management Utility: This utility can cause destruction of data. If you are not sure of what you are looking at and uncomfortable with using this utility you should consult with an advanced user before making any changes to drives using this utility. Also, drive '0' is usually your main hard drive.
Right click on you "My Computer" Icon
A menu will open
Chose "Manage"
The Computer Management window will open
The Computer Management window is broken down into 3 sections.
The first section on the left side of the window shows a menu. Disk Management is on the lower portion of the menu.
The right side is separated into two sections, top and bottom. The top portion shows a list of active drives on the computer. The lower portion shows all drives connected to the computer. CD or DVD drives that have not disk will not show as active drives on the top section, but can be seen in the lower section.
The lower section will show the drive description, drive size and drive condition (online or off line) in small box on the left side of that section. Disk drives will designate a "Drive" and a number. Drive 0 is usually your internal hard drive. Then it would list drive 1, drive 2, etc, depending on how many internal and external drive sources you have connected to your computer. Then it will list your CD drives and generally show their drive letter assignments.
Next to the smaller section described above, is a larger section which shows the driver letter, size of the driver and condition (if working correctly will show "healthy")
This is the area you can right click and get a menu that will allow you to open, explore, mark the partition as active, change the driver letter, format the drive or delete a partition. (A note of caution here. Changing the driver letter on your main hard drive partition will cause windows to stop functioning. The main hard drive, or hard drive partition, is normally given the letter "C".) A hard drive may show two or more partitions with separate drive letters designated for each partition.
A drive this is having a problem may show that it needs to be formatted (status as Unformatted). This can be done from this window. An external drive, whether it is a hard drive or CD/DVD drive, can have the letter designator change done if you want to organize your external drives. There are times when a drive will not show up because the drive letter that they are programmed to use are taken. Most USB drives are programmed to us the letters "F" or "G". In this area, you can assign the USB drive any drive letter that is not being used and this will make it visible in windows.
69 views
Usually answered in minutes!
×