After recording 3 drum tracks last night I accidently unpluged the workstation with out properly shuting it down. I can see all of my work but now when I try to select other songs or go to the other projects the curser gets hung up in the save prior project. THE SCREEN READS now working please wait. The curser has not moved at all. Normally the curser is moving prety quick and the selected project is loaded very fast. PLEASE help me Thanks

Best non-professional answer removed as not good enough for OP :>D

Unplug the power coming from the wall wait 30 sec then plug it back in then try.
Terry

First try a vacuum with a hose or maybe a hanger
Other wize you need to take apart
First UNPLUG FROM WALL
1) 2 screws at top of filter shute
2) take all screws out of back and remove
3) take screws out of back of sute and lift out take out sponge
4)Put all back together

I'd say the click track starts from exactly when you hit play even if you've hit play not right on the beat. There might be a setting or preference that can fix this.

Try rewinding back to be right on the beat and see if it syncs with the click

Hi, have you tried to do a factory reset?

Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press ENTER/YES.
If the factory reset does not fix the problem i think you have to format the disk because it has a fragmented disk .......

Here is a link for you to look at:http://www.tascam.com/products/2488mkii.html Look under resources to download the manual or a Beginners Guide to Recording.

Try inserting a limiter as the last step in the process, this will ensure a better level before mix down.

are u using the volume control or what mixer--u might want 2 try out the volume control--set it up recording

Have had the same problem with my Presidian3222 for the last year, if I recorded something it would come back as invalid disc or blank disc or would not close disc out right, got so damn mad almost took a hammer to it last night, unplugged it like clicky said, did no good, thought cable co may have been sending single to screw up recording, but today took camcorder and tried to record something, same thing which seemed to let the cable co off the hook.
the following seemed to have fixed the problem, first open the player then unplug it, close the drawer 1/2 way, then I took compressed air and blew inside the player to clean the laser after that I have been able to record 3 movies and close the disc properly and finalize the disc properly, I even had 50 new disc made by sony that recorded kept saying were invalid, reads them fine now, I hope this helps everyone, because I was on the edge of putting this thing in the trash last night.
R.J.

The best way is to download the manual from www.korg.com and read it. But quite simply:

Using the basic sequencer:

Realtime:
Realtime quantizing is done by selecting the "Reso:" near the upper right side of the screen at the main sequencer screen. Setting it to "Hi" turns it off. Any other selection sets it to that step for quantizing. Record your track as normal.

Previously Recorded Data:
Press "Menu" at the sequencer screen and select "Track Edit". From the pull-down menu in the upper right corner select "Quantize Track". If you don't see this option at first, scroll the the right. It should be the last one or near the last.