Hi i need to setup my voicemail but i dont know how, my phone model is uniden 6.0

As you have not provided the model number of the Uniden chordless phone system I will have a guess and ask you to see page 50 in the manual at this website for instructions on setting the answering machine. Hope it helps.
http://www.uniden.com.au/RESOURCES_MAIN/pdfs/DSS7955_1_OM.pdf

Hi Jessica,

I would suggest contacting Uniden rather than AT&T. I included their contact information below as well as 3 issues that may be going on here.

Uniden Technical Support
1.800.297.1023
M-F 8:30am-11:45pm CST & 2:30pm-4:45pm CST
Ask a Question: http://mycusthelp.net/UNIDEN/_cs/QuestionAsk.aspx?sSessionID=&

1. Are you getting messages? If not, the voicemail may have set to "Announce Only." This means the Answering system will answer the call, but will not allow callers to leave a message. If so, there may be an LED "A" lit up on your base. You can change this setting in the Answ setup --> record time.

2. Does it occur after a particular number of rings? You can set the voicemail to answer after 2, 4, or 6 rings. This may be the problem.

3. Does the phone ring at all? It is possible the phone is in Silent Mode. You can set silent mode to last anywhere between 1-9 hours or keep it on all the time. If it is set to a particular number of hours, the phone will exit silent mode automatically. If not, you need to hold # to deactivate it. I don't think you can set silent mode to turn on automatically on a schedule, but this is something you could ask Uniden about.

I hope that helps. Good Luck!

The Uniden 1260 isn't a voicemail system. To setup your voicemail system, please refer to the documentation for that system. If you're using the voicemail system provided by your telephone service provider, please contact them for instructions.

you can contact the service provider.......

Your model is a phone only, without an answering machine built in. This means that voicemail is provided by your phone service on your line, and that's where you need to adjust the rings before it picks up. The phone itself has nothing to do with it.

You may have to call your service provider for setup instructions because not all systems are the same, but here's how it usually works. Pick up your phone and call your own number to reach your voicemail. When your message starts, press the * button and the system will ask for your pass code (just like when you call to get your messages). Follow the voice prompts to reach the main menu, then mailbox settings, where you'll be able to change the ring count.

If these steps don't work for you, ask your service provider what you need to do.

Since you declined to specify the model of your Uniden system, I can only direct you to select it from the list beginning here to download a copy of the manual. I'm sorry I can't email you anything, but you also declined to publish an email address.

What model Uniden DECT 6.0 phone/answering machine?

Hi,

Many thanks for using FixYa.

Please let us know the complete model number of the phone.

Thanks again.

What model Uniden DECT 6.0 phone?

the voicemail ring count has to be setup on your phone line thru your voicemail menu,and has nothing to do with the answering machine. if you don't want the answering machine to pickup, just shut it off. follow the prompt's for your voicemail settings, there you'll be able to set the amount of rings you want.
hope this helps.
wg