Can you tell me the age of my KitchenAid dishwasher. Model #KUD101T JWH1 Serial #FM3209689 I am having a pump problem and would like to know the age of the unit Thanks

john gagnon

• 943 Answers
• Posted on Oct 06, 2008

SOURCE: water into dishwasher tub wont shut off resulting in overflows

Hi susan. the problem is with the water valve, which is located behind the bottom plate, of the dishwasher. remove . water valve, is on the left. thanks the appliance doc

SOURCE: Kitchenaid dishwasher mdl: kud101t jbt0

try the reset button sequence.. described in that other post about the clean light blinking.. that will reset the whole machine..

tpug

Ron Coons

• 2651 Answers
• Posted on May 18, 2010

SOURCE: Remove the Impeller on the motor of dishwasher

you can acess the impeller, by removing the lower spray arm, ther are 5 torx scrws holding the motor cover down, then from ther ther are 2 additional torx 15 screws covering the pump outlet and impeller housing, the impeller is spring loaded in place.

SOURCE: Manual for kitchenaid dishwasher Model #

I suppose you are looking for the user manual. See this site.

If not please confirm what type of manual you need and also whether you are trying to sort a problem with the dishwasher.

SOURCE: I have a Kitchenaid dishwasher

The white film that you are talking about could be two things. First is the quality of your water, having sediments either through the water system or from the water heater because the water that goes into the dishwasher is taken from the hot water supply. Second is the build up of soap residue and even with a rinse product it is not able to remove it. A simple remedy is to due a wash and rinse cycle without dishes and put vinegar in the dishwasher about a cup full (8 oz) and see if that will help. If not I would check the water and going in and out of your water heater. Good Luck

Testimonial: "I will try the vinegar."