My dishwasher dwf50 hotpoint has 2 lights flashing, it starts a cycle then the lights flash together, the delicate load and fast load then stops altogether, i have filled the salt and rinse aid, please help
Hi, just found this forum after searching the web 4 a solution to my hotpoint DWF50 problem.
I came down this morning to a machine which base tray was full of water and lights 3 ECO & 4 Fast flashing.
Anyway my solution was as i had seen a hotpoint engineer do once before was to press the start/reset button trip the catch, to fool the machine into thinking the door is closed then put in a program, press start, the machine hums slightly but doesnt do anything then after removing the large filter from the tray at the bottom underneath the lower basket insert a length of wire, with a loop on the end (Tip i used a wire coat hanger from the dry cleaners) poke in ythe hole that the dirty water drains from, after a bit of poking about the pump started working and the water drained away. Tip place a hook at the other end of your wire impliment to put your finger in to stop the wire getting caught in the pump mechanisim. After wards u have to hook back the door catch to the normal position, Tip another piece of the coat hanger with a right angled piece at the end will do this. This worked for me, saved me some money esp as D & G insurance ran out 2 weeks ago.....stu
2,683 views
Usually answered in minutes!
2 lights flashing and it won`t carry on any ideas
i have the same problem
I have the same
I am having the same problem with the DWF50 dishwasher model
when used it nevers seems to wash properly and both the "fast" and "delicate" lights flash at the end of the cycle, the manual gives no reason for this "code"
i have the same problem and thought it was the rinse aids and salt but seeing as you've tried it then it can't be the problem? have yu found a solution at all?thanks
rinse aid light does not light
×