How do I change the drill tips on the Dremel 370 6 model? Can't find the instructions. Thanks

The flashing light indicates an error, possibly your battery is shot or malfunctioning. New battery needed.

Engraver Kit / Model: 290-01 - Dremel.com

www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=290-01

DremelFeaturing a replaceable carbide point, Dremel's engraver kit lets you work on metal, ... http://mdm.boschwebservices.com/files/Dremel Engraving Tool 290 ...

Amazon.com: Dremel 290-05 120-Volt Industrial Engraver ...

www.amazon.com/Dremel-290...Engraver/.../B000VZ...

Amazon.com, Inc.
Rating: 4.2 - ‎62 reviews
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit .... tips and came from a different source ie there is no Dremel 290-05 tool. ... On the very first tool, afterengraving the serial number, the diamond tip began to loosen and slip out. ... When I returned to the engraver to tighten the set screw the tool fit perfectly, ...

Home Depot Dremel 120-Volt Corded Electric Engraver ...

reviews.homedepot.com/.../dremel-120...engraver...tool.../questions.htm

Afterwards you can remove the paper and glue with a simple adhesive remover or alcohol. ... I use the Dremel Electric Engraver Tool to engrave manufacturers name and model .... hardware store and they should be able to supply a new set screw for you. .... The 290-01 Engraver is for engraving applications only and is not ...

FAQ - Customer Service - Dremel

www.dremeleurope.com > Home > Customer Service

Dremel Europe

i would advise you to contact the company making them and ask if they can send you the users manuals, in my experience they will send it too you.

I presume you want to use a transformer to convert the Europe voltage to USA voltage ( 220 or 240 to 110 )
Why not purchase a 240 volt docking station ?
Send me the 10 digit number on your Dremel (usually starts with F ) and I can help you.

I'm not sure why but, the Dremel 9.6 volt battery is only available through a Robert Bosch retailer or authorized service center. Their homepage is at www.boschtools.com/Pages/default.aspx where you can search for the nearest service center under the 'Service' tab.

Hi. Is this a small rotary tool, like a Dremel? If so, I'm afraid it is probably just a weak tool with no torque. Buy a Dremel tool.

Your drill bits side, should have a twisting hand tightening head into which you insert the bits, and have fun. If this is missing, you can either buy it, at dremel stores, or get a nut of the same thread and get the job done.

The pdf manual is here: http://mdm.boschwebservices.com/MDMCache/English%20[US]/t10/0000000/r00554v-1.pdf
BUT it doesn't explain how to change the bits. If I remember correctly there is a grub screw near the tip that you loosen with a small flat blade screwdriver to change the tips. If your model is different then perhaps posting a picture would make it easier to give a better description.

go to Dremel.com and they can get you one if they are not available online at that site.

With the machine unplugged, check the motor brushes. They may be worn.

I have not had success doing any other repairs to the motor part of a Dremel. I do know they have a service center. Go here for more info:

http://www.dremel.com/en-us/customerservice/ServiceAndRepair/Pages/default.aspx

Thanks for your question at FixYa.com