I am having difficulty pairing plantronics 2xx with my blackberry curve. I previously had it paired to another blackberry that I had. I no longer have that blackberry (I did disable and delete the plantronics from the phone before I got rid of it). Problem is that I cannot connect/pair the bluetooth to the new phone. Please advise. Thanks

Make sure that your Blackberry's headset mode is activated. If the headset mode is turned on in the Blackberry menu and settings, you may also need to re-pair the headset to your phone to make sure that it has a good connection. Before running through the pairing process, be sure to totally delete the headset from the Blackberry's menu. You may want the headset turned off for this process.

Once you make your Blackberry discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Hi,you will have to delete the previous paired phones first before you can be able to pair the blackberry phone with your blue tooth device.

You can use the below steps to know how to pair properly:

Instructions

Pair Your Blackberry with a Bluetooth Headset



Turn on Bluetooth headset and Blackberry hand-held.

Enable the Bluetooth radio by going to the options window and clicking on Bluetooth. Click on Enable Bluetooth in that window.

Add your Bluetooth headset to your Blackberry by clicking on Add Device in the Bluetooth window.

Find and select the name of your Bluetooth headset from the list that appears. The Blackberry will search for all Bluetooth devices within range, so other devices might show up on the list.


Click Activate Bluetooth device if you receive a call and the Bluetooth headset does not pick up automatically.



Use your Bluetooth Headset with your Blackberry

Make sure the Bluetooth radio on your Blackberry is turned on before you try to use your Bluetooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the handheld.



Tips & Warnings

Pair your Blackberry with any Bluetooth-enabled device using the same steps as those for connecting a Bluetooth headset.

Remove your Bluetooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.



Hope it helped.

Thanks for usingf ixya..

The default code for Plantronics is 0000 (4 zeros). If you need more detailed instructions, visit their interactive pairing guide at: http://www.plantronics.com/media/media_resources/easytopair/

Did you do the steps listed here?
This is the Plantronics information.
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The rst time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not sucessfully paired after 10 minutes, your headset automatically
powers o. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the rst time:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
Press and hold the call control button to turn on your headset. (The indicator
ashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue ash, press and hold the call control button to
turn your headset o, and then press and hold the call control button again until
you see the red/blue ash.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
When prompted for the passkey, enter 0000.
When pairing is successful, the indicator on your headset ashes blue. Your
headset is now connected and ready to use.

I have plantronics 2xx ,samsung how do I o pair ?

my Plantronics 233 never asked me for code either...it just connected. The code will be 0000 either way.

re-pair and add to trusted devices be sure to use 0000 for passkey

USER GUIDE

Turn the 360 off.
Then turn Bluetooth off, then back on the Curve.
Then turn the 360 back on, input the code when asked to due so.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

The pairing pin should be 0000, most bluetooth device's use all 0's.
Hope this help's.

When it is turned off, hold the main button in for 4 seconds until the light flashes red, the release. It should flash red and blue. This means it is in pairing mode.