How do I turn ringer on, on Nortel T7316E - Lands Phones

Two different options,... Call the extension, and while it is ringing, press the volume down bar until you can no longer hear it ringing. You can also try this... Leaving the handset down, do Feature * 80, adjust the loudness for ringer volume by pressing the volume bar.

Have you tried to call the phone and adjust the volume on the set while the call is coming in? I think the only way you can adjust the ringer volume is if the phone is ringing.

Maybe you set the Do Not Disturb by mistake. press "feature #85"
or maybe you call forwarded it. press 'feature #4" or turn up the ringer 'feature *80'

On Nortel T7316E admin password should be 23646 - 2=A 3=D 6=M 4=I 6=N

To be sure, check out the user manual which you can get here: Nortel t7316e user manual

Hi D,

You should go into your voice mail and check your Outdial settings. If Outdial is turned on, you`ll need to deactivate call forward from there.

You can adjust the ringer of your Nortel phone by dialing Feature *6, then using the volume bar to adjust the ringer while the tone is playing, or dial Feature *80 to adjust it there.

MANY TIME A PERSON DIALS WITHOUT REALIZING THAT THE ACCEPTANCE CODE NEEDS TO BE INSERTED FIRST THE Nortel T7316E?...If you want to temporarily turn them off use do not disturb (feature 85, feature #85 to turn Do Not Distrub off) Turning off the ringing permanently will require you to program the set. Programming is done on M7310, ...regards John

It always will. Now you need to go into system programming and program the phone to NOT ring.

You have to go into programing to terminals and sets type in the local whos ring was turned off and turn back on . If you can,t get in to programing let us know.

You may need to change your Ring Volume. Here are some instructions on how to do so.

To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 – 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring
To Change the Ring Volume:
1. Press the Feature button, then * 80
2. Press the volume key up or down
3. Press the release key1 to exit and save the volume level

Let me know if this works for you.