Excalibur. K9-MUNDIAL-SS Entry Level Auto Alarm with Dual Zone Shock Sensor Logo
Posted on Nov 03, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to turn kill switch off and see manual and instructions

1 Answer

Alan H

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 139 Answers
  • Posted on Nov 04, 2010
Alan H
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Governor:

An expert whose answer got voted for 20 times.

Joined: Sep 30, 2010
Answers
139
Questions
0
Helped
95179
Points
339

I am assuming that you want to disable the system temporarily by putting it in valet mode. You will need to locate the valet button; they are usually installed under the dash within reach of the driver. The button should be black and about 1/2" in diameter.
Pressing and holding the button for 3 seconds while the alarm is disarmed will put the system into valet mode. The system will turn the LED light on steady and chirp the siren to indicate that valet mode has been activated. To exit valet mode, press and release the button. The LED will turn off and the siren will chirp to indicate that you have exited valet mode.

The included link is for the manual, see page 8.
http://www.caralarm.com/manuals/K-9/K9-Mundial-ss.pdf

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can you start a push mower with an engine control cord? Kill cord

Not sure what you mean by 'engine control cord' in relation to a 'kill cord / kill switch'.

Mowers either have a pull cord to start it or electric start. Pulling the cord makes the engine turn over, it fires and runs.

The kill switch does the opposite, it cuts the power to the engine and stops it.

All questions need 'make model (what it is)'. With that we can find the manual on Google.

make model manual

..
Apr 11, 2023 • Garden
1helpful
1answer

Turning over with kill switch off 1989 Suzuki GSX 600 F (Katana)

Hi, it could be that the switch inners are not functioning properly, open switch and make shore it is cleaned and working ok,and check wire connections are good, just food for thought, all the best.
0helpful
1answer

Front area dome lights won't turn off killing battery life. where is the relay for this?

Can you manually turn them off by moving the selector switch on the dome to "off" position? If not, the length of time that the dome lights were on may have melted the selector switch and you cannot turn them off except by removing the bulb...and replacing the switch or dome light.......
0helpful
1answer

How do I disable the alarm or kill switch on my Alarm

In the installation instructions it will describe which wire in the cars loom to reroute to alarm. Find out and rejoin this wire.
This is considering it is aftermarket alarm
0helpful
1answer

Manual kill switch

are you refering to an auto start? if you want to install a kill switch all you have to do is go to your stearing collum, of course your going to take the pannles off, find the big red wire thats main ignition to the switch cut and splice a toggle or a axilary key switch in line that will allw you to kill power to the ignition sutting down the rig hope it was helpfull but still need more info on what your asking
0helpful
1answer

I have a 2007 grandprix..i will b driving and the low beams will just shut off the high beams will work and interior lights all work and the display will say headlamps suggested. they will come back on...

more than likely the switch is dirty or most likely needs replaced....but sometimes the wiring has a bad spot or short..
it's always a mystery with Pontiacs..
check a repair manual for instructions..
switches can be obtained in many junkyards cheaply..
it might be cheaper to start with the turn signal/ light switch.
0helpful
2answers

Black screens, set checked everything but can not

The only "kill switch" I am aware of is the switch on the DVD compartment door. I don't have your exact model but, on my model, this switch is activated when the door covering the DVD is closed and deactivated when this door is opened (kills the DVD spin and reading laser). Look for a small square hole in the DVD player deck and a corresponding raised piece of plastic on the DVD door.

Good luck!
0helpful
1answer

No kill switch

but a photo and instructions would sure help.Are you sure you don't have a yellow? button on the top of the turn signal housing on the left handlebar ? Its kinda hard to press in. edit: sorry I was going from bad memory. Yellow is the horn. The kill switch is grey and on the top/backside of the same signal housing. It doesn't have a lot of off/on feel but if you push it hard enough it works.,,,
Not finding what you are looking for?

2,341 views

Ask a Question

Usually answered in minutes!

Top Dual Electronics Vehicle Parts & Accessories Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Dual Electronics Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...