I need to unlock a Toshiba DVD player/VCR Combo SDV395 to view DVDs' purchased in Francs

Some new dvd/vcr combo (or just dvd players) NEED to be plugged through either the HDMI or component cables (blue/green/red cables) in order to view the DVDs.

Try one of those to see if it fixes your problem.

P.S. don't forget to change the input of your TV to either the connection you are using for the DVD (HDMI or components)

This is a DVD player. It will not write to DVD but will play discs you have recorded elsewhere. You could (with non-copy protected discs) dub the DVD to VHS. To go the other way, you would need to connect the player to a computer with appropriate software or other DVD recording device.

I hope this helps.

Cindy Wells

you dont need a code ust plug into the audio/video out put at the back of receiver that should work

well it sounds like a problem with your lense. so just take it apart and look at your lens and see if there is anything wrong or out of the ordinary with it.

I`ve just downloaded these
VCR DVD Combo
Apex Digital 1061 VCR DVD Combo Go Video 0744 0715 VCR DVD Combo Hitachi 0000 VCR DVD Combo Panasonic 1762 VCR DVD Combo RCA 0060 VCR DVD Combo Samsung 1075 0820 VCR DVD Combo Sanyo 0104 VCR DVD Combo Sony 0864 VCR DVD Combo Sylvania 0675 0000 VCR DVD Combo Symphonic 0675 0000 VCR DVD Combo Toshiba 0503 This is the website http://www.ofausa.com/en/list_codes.php?db_value=expert4&remote_choice=URC 4021

And try this link as well http://www.ofausa.com/en/remote.php?type=URC 4021

Hope this is helpful, Ian

you bought it on ebay?

I had the same problem once and the solution is to reboot the DVD player. to do this you need to unplug the unit for 3 or more minutes and then you will have to go through the setup process again but everything should work fine and interlaced (not progressive) should be the dvd format again.

perhap there is a menu button on the tv itself,then you need scroll through the menus

hi

paragtm

search all over no luck yet will keep trying for you
in the mean time look here some good links that may help you out in the first few post .


riz.

You may have to push the channel buttons on the source and check the video unit until you see whats playing on the main unit once you have a picture comming thru you should be able to record. if not let me know we can figure out some other solutions to get you up and recording.