How to cleane comcoder head - Sony HVR-HD1000U Camcorder

I understand you have a problem. What is not clear from your description, however, is the actual nature of the problem. Please can you state it more clearly. Thank you.

There is no "MENU", there is a "SETTINGS". Use that I think. Remember these are Chinese, they dont eat at menus. Luck !

Cleaning the Print Head

Using the Head Cleaning utility
Using the control panel buttons

If you find that the printout is unexpectedly faint or some dots are missing, you may be able to solve these problems by cleaning the print head, which ensures that the nozzles are delivering ink properly.

You can clean the print head from your computer using the Head Cleaning utility in the printer software or from this product itself by using the control panel buttons.

Note:

• Print head cleaning uses both color and black inks. To avoid wasting ink, clean the print head only if the copy quality drops (for example, blurred printout, incorrect or missing color.)

• Use the nozzle check first to confirm that the print head needs to be cleaned. This saves ink.

• When the Error light is on and a message appears on the LCD panel to prompt you to replace the ink cartridge or to indicate the ink is low, you cannot clean the print head. In this case, replace the appropriate ink cartridge first.

Using the Head Cleaning utility

Refer to the appropriate section below to use the Head Cleaning utility.

For Windows

Follow the steps below to clean the print head using the Head Cleaning utility.

Make sure that A4 or Letter size paper is loaded in the sheet feeder.

Make sure that this product is on and the ! Error light is off.

Access the printer software.Accessing the Printer Software for Windows

Click the Maintenance tab, then click the Head Cleaning button.

Follow the on-screen instructions.

Head cleaning... appears on the LCD panel while this product performs the cleaning cycle.

Caution:Never turn off this product while Head cleaning... appears on the LCD panel. Doing so may damage this product.

When Head cleaning... disappears from the LCD panel, click Print Nozzle Check Pattern in the Head Cleaning dialog box to confirm that the print head is clean.

Good: print head does not need to be cleaned yet.

Not Good: print head needs to be cleaned.

If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again. See Cleaning the Print Head.

Note:

• If the copy quality has not improved after repeating this procedure four or five times, turn this product off and leave it alone overnight. Then, perform the nozzle check again and repeat the head cleaning if necessary.

• If the copy quality still has not improved, one or both of your ink cartridges may be old or damaged and may need to be replaced. To replace an ink cartridge before it is empty, see Replacing an Ink Cartridge. If the copy quality remains a problem after replacing the ink cartridges, contact your dealer.

• To maintain good copy quality, we recommend copying a few pages at least once every month.

i need key of UpdateMyDrivers.exe

First make sure headset/handset adaptors are not plugged into the phone

Press Select
Press Mute
Dial 68 (this will show the current setting)
Press * to change the setting
When the setting is at what you want press # this will save tyhe setting and exit programming mode

Hope this helps.

Hi, While you buy this camcoder you should get 2 disc there. 1 is Sony pictures motion browser then another 1 is enjoy dvd disc. The main softeware of your comcoder is the first disc ( Sony pictures motion browser). Just get installed it on your pc for geat and high speed download all data. Then paired your camcoder to pc and see pop menu in your pc ( it is the software). follow the instruction there to download your data)
regards

code p 1120 refers to throttle position sensor (TPS)
that unit responds to the accelerator pedal movement (APP)
===causes --faulty TPS--wiring -- poor connections-- TPS out of adjustment

symptoms include engine light on---no throttle response
reference site is www.engine -.comcodes

You can but the company battery in you nearest product service center for that specific product company

yes ask your local admin to make the ring changes in the station configuration

Cleaning the print head
To ensure good print quality, the MFC will regularly clean the print
head. You can start the cleaning process manually if needed.
Clean the print head and ink cartridges if you get a horizontal line in
the text or graphics on your printed pages. You can clean Black only
or three colors at a time (Cyan/Yellow/Magenta), or all four colors at
once.
Cleaning the print head consumes ink. Cleaning too often uses ink
unnecessarily.
Caution
Do NOT touch the print head. Touching the print head may cause
permanent damage and may void the print head’s warranty.
1 Press Ink.
2 Press ▲ or ▼ to select Cleaning.
Press Menu/Set.
3 Press ▲ or ▼ to select Black, Color or All.
Press Menu/Set.
The MFC will clean the print head. When cleaning is finished,
the MFC will go back to standby mode automatically.
If you clean the print head at least five times and the print has
not improved, call Brother Customer Service

Hope that helps,

Take Care,

Michael