Hi,i purchased a LG GM360 two weeks ago,and last night it keeps saying i hav "maximum limit of applications reached" when i go to open a message or play a video,i was wondering if you could help me?

Obviously the card memory is not being used. The phones internal memory is storing everything. The owners manual should instruct you on how to activate the memory cards.
murf427

the procedure of opening the face book in your cell phone is the same as operating the PC

Hello There! Go to the task manager and close all opened applications. If you can't find it, try restarting your phone & that should do it.
Then, once everything is closed you could be able to open any application you need. Try not to open to many application you don't use at once.
I hope that I have helped you & that this is post helpful to you at most! Don't Forget To Rate! :)

This means you have too many applications on the main screen. You have to delete one of the ones you do not use.

i have the same problem

Hi,
Try this...
Shutdown your phone;
Get the sd card out,restart the phone,shutdown again,put the card in ,and restart again.
I believe this message will not show again.("maximum limit of application reached").

I think U've installed many applications on Ur mobile(Note: there is memory limit for application also.).
So, first remove the unused applications & then try......

This happened to me and I found that by shutting off the phone and turning it back on will get rid of it...hope that helps :)

hi,

happens sometimes, go to main screen, press middle button on phone, press the arrow beside where it says "favourite apps, then select end all, try opening videos again,

It is possible to open multiple applications at once (shown by a "two overlapping squares" symbol in top line of main display - you may have opened several without shutting them down and reached a maximum. Click on Multitasking button (grid shaped button at top right of main screen) to see what applications are open and close them down.
If this doesn't work, power phone off, then on and see if that works.