HOW DO I CHANGE FROM VIDEO TO TV WITHOUT REMOTE?

Reset Sanyo Tv without remote
Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed. Use the {CH+} {CH-} buttons to select menus. Use the {VOL+} {VOL -} buttons to change settings. Some menus might have sub-addresses.
https://hardmasterreset.com/how-to-reset-sanyo-tv/

Unfortunately with most tv's today, you can't do much other than change channels or volume control without a remote.
Do you have an input button on the tv, if so, that will allow you to change from TV to video.

To get more details about how to unlock Toshiba TVs, visit this site ,Electro-help'.

Check the link below to find some info on how to access the video inputs without remote control.

How to Change the Input Mode on TV Without Remote Techwalla com

unplug tv for 10 minutes and try again

The only way to switch it from TV to video is with the remote control. Orion did not have many onboard controls.

I just purchased one of these televisions and it didn't come with a remote. However, a Philips Universal Remote (SRU2103/27)
with a code 0520 works fine. I haven't explored all the codes but I can easily change from tv stations to Video 1 and Video 2 merely by pressing the "Input" button on the remote.

If you have lost the remote, go to any electronics store and buy a universal one. I have programmed many generic remote controls, and they all work fine for adjusting the video inputs. Not all television sets allow their video inputs to be switched without the remote. Most likely you will have to buy a replacement.

Hi , there is a button on your tv set near the channel button. that will set your tv to video.

my TV remote broked and i want to know how can i change Emerson EWF2004to video without the remote so i can watch movies