How can you remove a 5100 error with a canon mp210?
1. Switch off the printer (the button, rather then from wall-plug
2. Press and hold Resume
3. Press Power
4. Holding Power , release and once again two times press Resume , then release simultaneously all button.
5. After indicator is flashing, fall into service rezume.
6. Four times press the button Resume , under each striking Resume indicators are switched: green-orange. Once press the button Power for acknowledgement of the selected action (the unset of the counter pampers). The Button Resume enter prefunction:
- 0 strikings unset main counter in 0%, or
- 1 striking unset additional (platen) of the counter in 0%, or
- 2 strikings installation both counter on 0% .
7. Press Power (is executed service-function, chosen striking Resume )
8. Once again Power - swich off.
×