I returned from holidays to discover that my MP730 is not working. The alarm light flashes continually and the message, Please wait is on the display. Every few minutes the display says: Check printer, press resume key.
I have pressed the Resume key. Nothing happens. I've turned the machine on and off. I've checked the to see that the computer recognises the printer and it says it's ready.
I did get a weird thing pop up when I first tried to print (and discovered these problems) saying that the drivers were missing. I instructed the computer to reinstall them and it said it did, but nothing has changed. Please help!
Can only try
To reset waste tank full error in MP730.
1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button
Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
336 views
Usually answered in minutes!
Alarm light flashing, please wait message occurred after paper ran out & was reloaded. Have tried turning machine on & off with no change. Have tried troubleshooting by turning spooling off, cancelling documents with no change.
×