NEED PARTS FOR A UT360 UPS. NEED DISPLAY/KEYPAD AND COOLING FAN WHERE CAN I FIND A ON-LINE REPAIR MANUAL AND PARTS?

you can get transmission cooling fans from any good auto spares / transmission repair shops
it is a fan be it fuso or generic and just moves air
it may be better if you just re-position the cooling radiator in the air flow in front of the radiator
go google and type in---fuso spares on line--- and there are sites that will have what you want

The type of fan can be very different between two similar UPS.
The easiest way is to open the UPS and watch for.
Some UPS requires exactly the same fan, and if they take too little or too much current UPS think that it is wrong on the fan and alarms!

You give little information, can you tell us more?
If the UPS is in a sufficiently cold room it can last without a fan.
But better is if you use a UPS Line Interactive mode fashion.
It is quiet until it starts working.

First calculate the total load of the UPS and then calculate the total load. One of the Intel Module is Primary and one is Secondary. I can't remember exactly which one is primary. Q1. There will be a LED on the INTELI MODULE flashing RED. That identifies the bad MODULE. Q2. You can remove the MODULE, but I recommend you place the UPS in Static Bypass first through the Display Menu. Also make sure the UPS is in NORMAL MODE or already in STATIC BYPASS, the LED's on the Display should indicate what mode its in. Q3. You can remove the display from the Inteli Module with out harming the load. You just can't do anything with the UPS, as to tell it to Go to Bypass (Static Bypass) or get out of Bypass, check voltages, etc. So order the part first by getting part number on the sticker off the Module, then schedule your shutdown and perform the you maintenance after hours this way you don't affect anything during business. Also don't do the repair on a Friday due to the fact its weekend and APC/Third party UPS companies will charge you a lot to come out in the weekends. FIRST DO THIS PLEASE- GET THE MANUAL FOR THIS UNIT!!!! And READ IT FIRST!! Find in the manual where it walks you through putting the UPS In bypass (Static Bypass). Follow the manual, My way of doing is to READ TWICE, OPERATE UPS ONCE!! This has help me not dump any loads. My suggestion to you is to check if unit is in Bypass (static Bypass due to the faulty module. If it is on Bypass then all you need to do is follow the procedures to place UPS in External Maintenance Bypass. If UPS is in Normal mode but with Alarms and Beeping, then Navigate through the display and find the BYPASS Mode. Then hit enter Yes on the BYPASS MODE, it will ask you again if you want to "Place UPS INTO BYPASS. Hit YES. You will hear it click. Your LED on the display should Light UPS Solid "BYPASS LED ON" AGAIN Please keep referring to the MANUAL. Once your in bypass mode (Static Bypass) then you can operate the External Bypass Switch on the bottom of the UPS. That is the Maintenance Bypass Switch. This isolate the UPS completely and your load never see's the transfer from Static Bypass to External Bypass, Because its a MAKE BEFORE BREAK System. (Make the power before Breaking the Power) Sorry to get down to simple terms, but when I work on a UPS its personal due to the fact you are responsible for the all that is on the OUTPUT of that UPS. Once on External Bypass, You can now do you module swap. Turning the UPS back on, Please follow place UPS back On Line in the UPS Manual. Also in the Diagnostics, off the display of the unit, it also identifies what module is bad including the Power Modules to the Battery Modules.

Google to Encompass parts Distribution and type in Model number printed on back of TV they will list Parts and Free Service Manual if they have it you can print it out on line

Check your local library for a Chiltons or Haynes repair manual or spend the $20 for one at a parts store. There are repair manuals on-line, but mostly for older vehicles.

well it could be your fan is dirty that why it makin lot of noise the problem why the ups i quite runnig the fan it becoz it try to cool down the temperture.. as i know your ups i puttin under the desk there not much ventiltation and the floor is dusty.. to be right you hav to place somewhere that is cool and more ventilation.. so the ups won't always be makin sound.. well replace a cooler fan would cost u much and also even u replace the fan it matter of time when your ups trap more dust and evently the ups might givin noise plus your ups might hitting not juz the fan it might be you hardware havin the problem or the battery is easy spoil within 2 years time or less

call powerware