Invicta pro diver strap length

Sea Spider 1261 INVICTA Sea Spider Men 50mm Stainless Steel Gold Black dial 3600K Mechanical watch located attached link offers multiple compatible straps

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jamie_580d75bd3bb6d659

invictawatch.com/customer-service

Battery for Invicta Model 5017 is #371

The caps are just for decoration. They dont cover anything. To remove the strap, you have to release the spring loaded pins from the underside of the band. There are two on both ends. Reuse the pins with the stainless band but be careful not to have a pin go into the wrong hole because they can't be removed without breaking them!

mcdevito75 here, I would contact shop NBC for info, here is their contact number, 800-474-6762 They should guide you to Invicta parts.

mcdevito75 here, Aren"t the spring bars (pins) built into Invictas Strap?? Look on the back of the Strap real close to where ot attches to the watch, see a little tab you can move with your fimger, this tab should compress the spring bar (pin) and allow you to remove the strap.

Set it only at night but not between 8 and 2. Use the johnson rod that came with it.

I know of a couple places in San Antonio and Austin that would be able to custom fit your new band or help you with a repair.

Precision Time

They are located in the malls in either city. They also have a web site.

PrecisionTimeCo.com

You can try to contact Invicta for new links and they may have them depending on the age of the model. Look at your owners manual for contact information.

Most watch pins go for an average of 5 to 10 dollars per pin. If the band is in good condition there is no need to replace it. Most invicta metal bands can retail from 35 dollars and up. We are located in the Holyoke Mall in Holyoke MA