On this free standing gas range what does "PF" code mean ?
"PF" indicates the electronic control detected a Power Failure.
This could have been caused a brief power outage OR may be an indication that the connections to the oven, either at the stove or at the plug are loose.
Press and hold the Clear/Off button for three seconds . A beep wil sound and Door Loc will flash until the door unlocks. That's what my maual says. Not sure if we have the same oven...
Frigidair Pro series.
The "lock" light came on and my oven door will not open. I do not have an owners manuel as we just
bought the house and the previous owners did not leave one. The previous owner suggested that we
unplug the stove and replug it. This has not helped. Can you tell me what to do?
I appreciate your inquiry, J.J!
From what you have described your Frigidaire oven is displaying an error code of "PF" and you just installed the control panel. A "PF" error code stands for power failure. This could be a possible problem with your control panel and power source. You may need to perform a reset on your oven and you can do that by flipping the household circuit breaker off for at least ten minutes. If this does not help resolve your issue I would recommend having a professional technician out to perform a proper diagnosis and repair. I hope this information is helpful to you. -Matt
Hello lornalang - Typically "PF" indicates power failure. Once again try reprogramming the range by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If it proves to be ineffective, the range may possibly be experiencing a wiring failure or faulty EOC. Consult a professional to move forward accurately and to assist with the repairs.
9,775 views
Usually answered in minutes!
My Frigidaire professional series duel fuel stove was beeping and as per the user manual I was required to clear it but pressing "Stop". But that did not work. In order to stop the beep I shut the power off. Now (with power turned on) the beeping has stopped but PF error is displaying and I am unable to clear it and hence am unable to use any of the buttons on the panel (so oven is not working but gas is). Please help!
When ever my oven goes to cool down a PF code pops up on the display. This keeps happening over and over. I can press clock to reset the clock and it seems to take the PF code of the display until the next time I use my oven and it goes into the cool down mode.
i was cooking cake ,i look up and my oven showes pf what do i do
×