Samsung SPN4235 42 in. Plasma HDTV Logo
Posted on Oct 26, 2010

Power light comes on and clicking is heard but no picture or sound on 42" Samsung TV. main power supply board replaced capacitors look good fuses all checked and none appear blown...

1 Answer

A

Anonymous

Your problem is more a defective y board with y buffer boards one of them is short

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Can you help me troubleshoot my TV? It has audio but no picture.

Use a voltmeter to confirm all the voltages are present when the TV is powered on. If they are all correct then replace the led driver.
1helpful
1answer

I have a Samsung PN51E530A3FZXA 51" plasma TV. I heard a pop & saw smoke from left rear of TV. TV went black & had no picture or sound, however the red power light stayed on.

Unfortunately plasma tvs are a lot more complex to service, instead of 2 or 3 boards there are a half dozen at least. I would guess when the main PS board went out it took some other boards with it. I don't have a manual for your set but I would look at the power supply sub boards, there generally are 2 of them, or on some models that is parts of the other boards. Generally there is a legend to see what voltages are supposed to be present at what places, samsung is good about making the test points on the boards. Also there are fuses on most the other boards and its possible one of those has blow, it won't be a typical fuse like your used to seeing, some are a small green component and some are white mini fuses...Good luck!
2helpful
2answers
0helpful
4answers

Samsung PS42B430 42" Plasma tv. LED flashes and

The tv power supply board have more dead components parts,u just don't have the skills an the know how to trouble shoot find out more dead components parts that all.Try website like Ebay.com to buy a whole refurbish power supply board for the replacement.
0helpful
3answers

Have a vizio vx 42l on the bench. amber light only no power up have my standby 5vdc and my 3.3vdc power button is sending a high pulse to the main mod but i dont get pson to the power supply mod suspect...

This is your mainboard needing replaced! Simple as that!

The main sends the pson signal and without it...you have a dead tv.


Please rate if this helped :)
0helpful
1answer

Heard a pop sound...turned it off then back on and the red light is flashing and it's making a clicking sound

This problems it the causes by the power supply board have dead parts call capacitors.That the board,where the power a/c cord plug into it.U have tools like a soldering iron,desoldering pump or a roll of desoldering braids,a roll of solders?U know basic electronic and can do basic soldering?Yes,check the power supply board for dying and dead capacitors,these capacitors are alway bulges up or puffing up on it tops.Replaced these dying and dead capacitors parts,will get ur tv stop making clicking sounds and the tv power will be stable again,tv will work.Or try website like Ebay.com to buy a whole refurbish power supply board for the replacement.
2helpful
1answer

Red light flashing, no picture/sound!!!!

HI, this unit has 3 main fuse links on the main board that may be blown. the fuse links should be check before you move further into the diagnosis stage. once you have checked the fuses and they are still in a working state, this will confirm a power supply board failure. this board provides and regulates the current flow and distribution of it throughout the entire unit. If the fuses are fine and the power supply board is damaged, the green light will come on briefly then, the main control will notice that the power supply is not functioning properly. Once the main control board senses an abnormal current, it will shut down the TV rendering the red light warning. The list of fuses to check are below. Remember, if they are fine and working, the issue will be the power supply board itself and, it will need to be replaced.

FUSE CHECK LIST--

3A 12v- fuse----(242208600623)
SM 3A 125v-fuse----(242208600657)
500 MA-fuse-----(242208611092)

PART NUMBER FOR POWER SUPPLY BOARD

(996500036816)


Please rate and god bless:)


13helpful
3answers

Samsung LCD tv wont turn on

what the full model number of your tv?
the clicking sound is the result of a faulty power supply, some capacitors(blown heads) on the power supply for the output voltage rail of the mains board need to be replaced.

pls rate me!
0helpful
2answers

Samsung no picture

There are several capacitors that are known, in Samsung TV's that go out.. ( I replaced mine until the board was burnt through.. bought a new board, they went out again.. BOUGHT A LG TV!!)
Samsung settlement warrants older TVs with faulty capacitors

Samsung LCD Plasma TV Capacitor Repair Kit Replacement Parts

replacing these is not hard at all.. if you can use a soldering iron, you can do it..it just takes time..

Repair Samsung LCD TV Relay Clicks Shuts Off Won Come On

WATCH THESE VIDEOS FIRST.

Samsung TV Won Turn On How to Repair Bulging Capacitor for Clicking Noise

My Repair of 46 Samsung LCD TV with Bad Capacitors

Not finding what you are looking for?

366 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...