Help for resolving the error code C1183 of muy Konica Minolta C252
First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly, open both rear and the front cover and check the lower gears attach is the up/down drive belt. that lower gear one might be broken by the pin slot.
Tray lift motor failure on the finisher.
C1183 Finishing option elevator drive
malfunction
See FS-514 Service Manual.
See P.65
Sounds like you have a finisher with the optional output tray and the selector is not in the right position. OR you have a bad ground.
Something with your finisher most likely. I wouldnt tear it apart to check wiring unless you started with the obvious.
This problem belongs to elevetor motor of your finisher check by power off and on its going to initialize or not if not open eleveter section and reassemble it
C-DCA0
Konica minolta di470 1808 error code
I have a KONICA MINOLTA bizhub 7115, but I do not know the code developer (ATDC - auto adjust), please let me know. thank you
Head temprature
20,902 views
Usually answered in minutes!
Code C1183 is a finisher / sorter elevator motor failure.
Check to make sure there aren't ant papers / objects lodged in the finisher.
Unfortunately, the service manual isn't more specific as to where to look.
×