Not programmed Our lg tv 26inch was working but we turned it on last night and it didn't work kust keeps saying not programmed in a box that keeps moving around the screen. Can anyone help

Likely not related but HDMI does not like being connected if either unit is plugged in or powered up.

As to the TV let me know the brand and model number and what if any lights at all come on when you plug it in etc.

SD TECH

THERE IS A INTERNAL PROBLEM !!! If it is still under warranty, take it back

This seems to be a common question - its actually caused by a faulty tuner on the i/o board - you will probably find connecting a pvr to the hdmi slots works using the tv aerial!

The check is to remove the aerial from the back of the LGTV and plug the aerial rf into a youview or tivo box and then see if you get a signal through hdmi to the tv - this proves its the tuner circuit on the tv i/o board - sometimes it can be cured by reloading the firmware even if its the same revision as the firmware may have been damaged but 90% of the time its a hardware issue and needs an electornics repair or buy and swap a i/o board from ebay!

Note however that if its freeview channels they have been changing the multiplexes so the signal strength may be reduced and your tuner board is not detecting an aerial signal connected so just greys out the aerial symbol.

Either way its going to be an expensive fix!

Tries tv and cable box unplug,replug it back like about an hour later.For the tv to do a resetting itself back to the factory setting.The cable box to reboot and upgraded it software.Than go in to the tv Menu go to Audio Setting go down and do a resetting back to the tv factory setting.By doing these steps u have a great chances to get ur tv audio sound back.Not have the same problems after this than the tv Tuner signal board it is shorted in the audio ICS modjulation sections.Tries websites like Shopjimmy,com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

hi there, last night, my 50 lg decided to stop working, im getting a fuzzy picture, no audio and everytime i use remote to turn on tv it keeps doing the same thing?

Take it back to the shop for a replacement.

Tries unplug,replug both tv and cables or satalites boxes an hour later.Tv should reset it self back to factory,pay boxes upgrade it softwares.The tv should work,back to normal.Not, take another tv test that incomming brocasting signal cable.If the incomming brocasting signal is good.Than the tv Tuner board is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner board for the replacement.

i was watching tv last night on my lg,and it went off and said no signal?so i went to retune and now it says not programmed i cant get my dtv channels back

check your connections again and ensure you have the audio going out. With many tv's you need to change a setting in the menu, double check that as well.

Hi, This happens frequently. Go to this website http://antennaweb.org and type in your address. The site will provide you the best type of antenna and orientation based on your location and proximity to HDTV signal provider. To program your TV, grab your remote and navigate to Tuner, pick antenna then perform auto-search. One more thing TheDon888, sports program rocks on HD!!! :-)

FixYa!