I have a Jack Lalane Power Juicer and can't figure out how to take it apart to clean it. Can't find the manual.
There are two holes on the surface of the blade. When the juicer was bought, it came with a half moon shaped orange tool that has two posts that fit into these two holes.
By inserting the tool into these holes you can unscrew the blade from the machine as long as you hold the outer screen while doing so.
Once this is done, you simply lift the other pieces off.
If you can't find your orange two prong tool, i would suggest using a screw driver or two that fit into the hole(or two)..... hold the orange screen and turn the blade counter-clockwise..
Hope this helps
Smitty
We also have a Jack LaLanne's power juicer classic and we can't figure out how to take it completely apart and then we need a new manual for it!!
Thanks
Kathy
If like me you obtained the juicer second-hand minus the manual, you would have a gloopy basket and be frustrated because there seems NO way to remove it.
I realised through the internet that I had a mising part which would remove the basket. But StevenhTims' advice is spot on and now I have a clean juicer ready to reuse!
1,698 views
Usually answered in minutes!
top is off that is as far as i got to clean
how to clean this machine
I can not get the baskit out
given juicer, cannot figure out how to take the blade / basket part off!
i cant clean an take it apart
TOOK BLADE OUT OTHER PIECES WANT COME OUT
You can take the blade off by unscrew the 3 little screw or use the tool insert into two holes on the blade, but the basket does not come off.
×